Workhorse W24 Disc Brake Pads in US

Disc brake pads are the most frequently replaced component in your Workhorse W24 braking system. The friction material your W24 calipers press against the rotor surface wears down with every stop, and the right pad formulation for your Workhorse W24, your driving style, and American climate directly affects your stopping distance, rotor lifespan, brake noise, and dust output.

What Are Disc Brake Pads on the Workhorse W24

A Workhorse W24 disc brake pad is a steel backing plate bonded to a friction material compound. When you press the brake pedal on your W24, hydraulic pressure forces the caliper pistons to squeeze the pads against the spinning rotor, converting kinetic energy into heat and slowing your Workhorse W24. The friction material wears gradually and must be replaced when it reaches the minimum safe thickness, typically 3mm, to maintain full stopping performance on your W24.

Signs Your Workhorse W24 Disc Brake Pads Need Replacing

• Squealing or squeaking from your Workhorse W24 when applying the brakes, wear indicator contacting the rotor
• Grinding, metal-on-metal sound from the W24 indicating pads are fully worn through
• Longer stopping distances than normal for your Workhorse W24
• W24 brake pedal requires more pressure than usual or feels soft underfoot
• Steering wheel or seat vibration on your Workhorse W24 during braking
• Visible pad thickness below 3mm on your W24 when viewed through the wheel spokes

Ceramic vs. Semi-Metallic Pads for the Workhorse W24

Ceramic Brake Pads for the Workhorse W24

Ceramic pads are the premium everyday choice for most Workhorse W24 drivers. Formulated from a dense ceramic compound, W24 ceramic pads maintain consistent friction effectiveness across a wide temperature range, including cold starts on your Workhorse W24 at sub-zero temperatures. They produce minimal dust, run quieter in stop-and-go city traffic on the W24, and are significantly gentler on Workhorse W24 rotor surfaces than metallic alternatives.

Semi-Metallic Brake Pads for the Workhorse W24

Semi-metallic pads excel under sustained heat loads on the Workhorse W24. They are the preferred choice for W24 trucks and SUVs used for towing, and performance Workhorse W24 vehicles where braking generates high sustained temperatures. Semi-metallic pads provide more aggressive stopping bite at high temperatures on your Workhorse W24, at the cost of slightly more noise and dust in everyday driving.

Why GeoBrakes for Workhorse W24 Disc Brake Pads

Our brake pad selection for the Workhorse W24 is curated specifically for American road and climate conditions. Every ceramic pad confirmed for the Workhorse W24 in our catalogue is evaluated for cold-weather friction effectiveness on your W24, not just room-temperature lab specs. Brands including Akebono, EBC, and Raybestos are stocked as authorized retailer products for the Workhorse W24, meaning full manufacturer warranty and zero grey-market risk on every W24 purchase.

Frequently Asked Questions - Workhorse W24 Disc Brake Pads

How often should I replace my Workhorse W24 disc brake pads?

Most Workhorse W24 brake pads last between 40,000 and 70,000 kilometres, but this varies based on driving style and conditions. American city driving tends to wear W24 pads faster than highway driving. Inspect Workhorse W24 pads at every oil change and replace when friction material reaches 3mm or less.

Should I replace front and rear brake pads on my Workhorse W24 at the same time?

Not necessarily. Front brakes on the Workhorse W24 handle 60 to 70 percent of braking force and typically wear faster. Always replace pads as an axle pair on the W24, both left and right on the same axle, to maintain even braking force.

Are ceramic or semi-metallic pads better for my Workhorse W24 in American winters?

Ceramic pads are the better everyday choice for most Workhorse W24 drivers. For W24 drivers who tow regularly or drive performance Workhorse W24 vehicles, semi-metallic pads deliver superior stopping bite and heat resistance under demanding conditions.