GeoBrakes stocks a complete range of passive and active ABS wheel speed sensors confirmed to fit the Toyota Rav4 Prime, each sourced to OEM specifications for direct-fit installation and reliable ABS performance on your Rav4 Prime. Every Toyota Rav4 Prime sensor is compatible with traction control and stability control systems.
Your Toyota Rav4 Prime ABS wheel speed sensor is the component that makes anti-lock braking possible on your Rav4 Prime. It monitors the rotational speed of each wheel in real time and sends that data to the Toyota Rav4 Prime ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Rav4 Prime, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Toyota Rav4 Prime wheel speed data is reaching the module.
The ABS wheel speed sensor on the Toyota Rav4 Prime is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Rav4 Prime. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Rav4 Prime ABS module interprets as wheel speed. On most modern Toyota Rav4 Prime vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Rav4 Prime systems simultaneously.
GeoBrakes stocks both passive and active ABS wheel speed sensors for the Toyota Rav4 Prime. Passive sensors use an analog signal and are found on older Rav4 Prime vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Toyota Rav4 Prime vehicles manufactured after the mid-2000s and are required for full compatibility with modern Rav4 Prime traction and stability control systems.
Signal accuracy matters as much as fitment with Toyota Rav4 Prime wheel speed sensors. A sensor that generates the correct frequency for your Rav4 Prime ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Toyota Rav4 Prime. Every sensor in the GeoBrakes catalogue is matched to the Toyota Rav4 Prime through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Rav4 Prime.
Can I drive my Toyota Rav4 Prime with a faulty ABS wheel speed sensor?
You can drive the Toyota Rav4 Prime with a failed ABS sensor, but the anti-lock braking system on your Rav4 Prime will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Toyota Rav4 Prime. Replacing a failed sensor promptly is strongly recommended, particularly before winter.
How do I find the right ABS sensor for my Toyota Rav4 Prime?
Use the GeoBrakes vehicle selector and enter the Toyota Rav4 Prime year, make, and model. The system displays only the sensors confirmed to fit the Toyota Rav4 Prime, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Rav4 Prime to avoid receiving the wrong unit.
Do I need to replace all four ABS sensors on my Toyota Rav4 Prime at the same time?
No. ABS wheel speed sensors on the Toyota Rav4 Prime are independent components and only the failed unit needs to be replaced. However, if your Rav4 Prime has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Toyota Rav4 Prime sensors for corrosion while the wheel is removed.