Standard/OE$180.70
10 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake caliper kits confirmed to fit the Hyundai Kona, pairing a replacement caliper at the correct left or right hand specification for the Kona with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Hyundai Kona is restored in a single service. Every kit is confirmed for the Hyundai Kona exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OE$180.70
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$199.70
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$201.32
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$382.02
10 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Hyundai Kona seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Kona keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Hyundai Kona is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Hyundai Kona together.
The kit for your Hyundai Kona includes the disc brake caliper at the correct left or right hand specification for the Kona, either new OEM-spec or quality remanufactured to the Hyundai Kona piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Kona caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Hyundai Kona, brake lubricant for correct pin and shim installation on your Kona, and copper washers or banjo bolt seals for the brake hose connection where required by the Hyundai Kona application.
A caliper kit is the right call for the Hyundai Kona in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Kona are already compromised. During a high-mileage Kona overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Hyundai Kona are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Kona brake pad renders the friction material permanently ineffective on your Hyundai Kona.
New OEM-specification calipers for the Hyundai Kona are manufactured from fresh materials with no prior service history, the strongest choice for Kona vehicles in high-corrosion environments. Remanufactured calipers use original Hyundai Kona housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Kona replacement applications.
Calipers for the Hyundai Kona are the most position-specific brake component in the catalogue. Left and right calipers for the Kona are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Hyundai Kona exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Hyundai Kona at the same time?
It is strongly recommended. If one caliper on the Hyundai Kona has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Kona. Replacing both restores balanced, even braking and eliminates the risk of the second Kona caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Hyundai Kona after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Hyundai Kona to install the new caliper allows air to enter. After installation, the brake circuit on the Kona must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Hyundai Kona.
What is the difference between a new and remanufactured caliper in the Hyundai Kona kit?
A new caliper for the Hyundai Kona has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Kona housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Hyundai Kona applications.