Bmw 428i Gran Coupe Disc Brake Kit in US

A complete disc brake kit for the Bmw 428i Gran Coupe is the most efficient way to perform a full axle disc brake service on your 428i Gran Coupe. The friction components, rotor surface finish, pad compound, and caliper hardware on the Bmw 428i Gran Coupe all function as an integrated system. Sourcing each element separately for the 428i Gran Coupe introduces compatibility variables that manifest as brake noise, vibration, or inconsistent pedal feel in the first months of service on your Bmw 428i Gran Coupe.

What Is Included in the Bmw 428i Gran Coupe Disc Brake Kit

The kit for your Bmw 428i Gran Coupe includes front or rear disc brake rotors at OEM or performance specification for the 428i Gran Coupe, brake pads in ceramic or semi-metallic formulation compound-matched to the Bmw 428i Gran Coupe rotor specification, a caliper hardware kit with slide pins, pin boots, and anti-rattle clips for correct caliper float on the 428i Gran Coupe, brake lubricant for correct caliper pin and shim installation on your Bmw 428i Gran Coupe, and rotor mounting hardware where required by the Bmw 428i Gran Coupe application.

Three Kit Levels for the Bmw 428i Gran Coupe

OEM Replacement Disc Brake Kit for the Bmw 428i Gran Coupe

Restores factory braking performance exactly on your Bmw 428i Gran Coupe, the correct specification for everyday commuting and family use of the 428i Gran Coupe in American conditions.

Antirust Coated Disc Brake Kit for the Bmw 428i Gran Coupe

The most practical choice for American Bmw 428i Gran Coupe drivers. Zinc-coated or e-coated rotor surfaces on the 428i Gran Coupe resist the rust that plain rotors develop within days of road salt exposure on your Bmw 428i Gran Coupe, maintaining consistent friction performance through multiple winter seasons.

Performance Disc Brake Kit for the Bmw 428i Gran Coupe

Uses cross-drilled and slotted rotors with high-performance pads for Bmw 428i Gran Coupe drivers who tow, drive mountain roads, or generate sustained braking temperatures beyond what factory-spec rotors manage effectively on the 428i Gran Coupe.

Why Correct Hardware Is as Important as the Friction Components on the Bmw 428i Gran Coupe

Caliper slide pins, pin boots, and anti-rattle clips on the Bmw 428i Gran Coupe are the most commonly overlooked components in a brake service and the most common cause of brake noise complaints after a pad change on the 428i Gran Coupe. Sticking slide pins on your Bmw 428i Gran Coupe prevent the caliper from floating freely, causing the outer pad to wear faster than the inner. Every GeoBrakes disc brake kit for the 428i Gran Coupe includes fresh hardware as a standard component.

Signs the Disc Brake Kit on Your Bmw 428i Gran Coupe Is Due

• Vibration or pulsation through the 428i Gran Coupe brake pedal during stops
• Squealing or grinding from the Bmw 428i Gran Coupe brake corners indicating worn pads and damaged rotors
• 428i Gran Coupe rotor surfaces scored, grooved, or below minimum thickness specification
• Bmw 428i Gran Coupe pulling to one side under braking
• Brake warning light illuminated on your 428i Gran Coupe dashboard

Why GeoBrakes for the Bmw 428i Gran Coupe Disc Brake Kit

Our disc brake kit range for the Bmw 428i Gran Coupe is built with coated rotor options at every kit level to address road salt corrosion that shortens rotor life on most American 428i Gran Coupe applications. As an authorized retailer of Cardone, EBC, Brembo, Raybestos, and Akebono, every kit for the Bmw 428i Gran Coupe ships with full manufacturer warranty coverage.

Frequently Asked Questions - Bmw 428i Gran Coupe Disc Brake Kits

Should I buy a front kit, rear kit, or both for my Bmw 428i Gran Coupe?

Front brakes on the Bmw 428i Gran Coupe handle 60 to 70 percent of braking force and wear faster than the rear. If only one axle on your 428i Gran Coupe is due for service, buy that kit. If both axles on the Bmw 428i Gran Coupe need service simultaneously, combining them in one order above $99 qualifies for free US-wide delivery.

What rotor type should I choose for my Bmw 428i Gran Coupe in American conditions?

For everyday commuting on your Bmw 428i Gran Coupe, an antirust coated OEM kit is the most practical choice, delivering factory-level performance while resisting the corrosion plain rotors develop rapidly on the 428i Gran Coupe in road salt conditions. For towing or performance driving with your Bmw 428i Gran Coupe, a drilled-and-slotted performance kit provides improved heat management.

How long do disc brake kits last on a Bmw 428i Gran Coupe?

Under normal American driving, a quality disc brake kit on the Bmw 428i Gran Coupe typically lasts 50,000 to 70,000 kilometres. Antirust coated kits tend to last longer on the 428i Gran Coupe because corrosion is a major cause of early rotor replacement on American Bmw 428i Gran Coupe vehicles.