Volvo V60 ABS Wheel Speed Sensor in US

Your Volvo V60 ABS wheel speed sensor is the component that makes anti-lock braking possible on your V60. It monitors the rotational speed of each wheel in real time and sends that data to the Volvo V60 ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your V60, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Volvo V60 wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Volvo V60

The ABS wheel speed sensor on the Volvo V60 is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your V60. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the V60 ABS module interprets as wheel speed. On most modern Volvo V60 vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple V60 systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Volvo V60

• ABS warning light on your Volvo V60 dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the V60 ABS light
• ABS activating on your Volvo V60 during normal stops at low speed where it should not engage
• Complete ABS deactivation on the V60, wheels lock under hard braking on wet or icy roads
• Speedometer on your Volvo V60 reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Volvo V60 ABS control module

Passive vs. Active ABS Sensors for the Volvo V60

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Volvo V60. Passive sensors use an analog signal and are found on older V60 vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Volvo V60 vehicles manufactured after the mid-2000s and are required for full compatibility with modern V60 traction and stability control systems.

Why GeoBrakes for the Volvo V60 ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Volvo V60 wheel speed sensors. A sensor that generates the correct frequency for your V60 ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Volvo V60. Every sensor in the GeoBrakes catalogue is matched to the Volvo V60 through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your V60.

Frequently Asked Questions - Volvo V60 ABS Wheel Speed Sensor

Can I drive my Volvo V60 with a faulty ABS wheel speed sensor?

You can drive the Volvo V60 with a failed ABS sensor, but the anti-lock braking system on your V60 will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Volvo V60. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Volvo V60?

Use the GeoBrakes vehicle selector and enter the Volvo V60 year, make, and model. The system displays only the sensors confirmed to fit the Volvo V60, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your V60 to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Volvo V60 at the same time?

No. ABS wheel speed sensors on the Volvo V60 are independent components and only the failed unit needs to be replaced. However, if your V60 has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Volvo V60 sensors for corrosion while the wheel is removed.