Volvo S80 ABS Wheel Speed Sensor in US

Your Volvo S80 ABS wheel speed sensor is the component that makes anti-lock braking possible on your S80. It monitors the rotational speed of each wheel in real time and sends that data to the Volvo S80 ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your S80, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Volvo S80 wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Volvo S80

The ABS wheel speed sensor on the Volvo S80 is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your S80. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the S80 ABS module interprets as wheel speed. On most modern Volvo S80 vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple S80 systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Volvo S80

• ABS warning light on your Volvo S80 dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the S80 ABS light
• ABS activating on your Volvo S80 during normal stops at low speed where it should not engage
• Complete ABS deactivation on the S80, wheels lock under hard braking on wet or icy roads
• Speedometer on your Volvo S80 reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Volvo S80 ABS control module

Passive vs. Active ABS Sensors for the Volvo S80

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Volvo S80. Passive sensors use an analog signal and are found on older S80 vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Volvo S80 vehicles manufactured after the mid-2000s and are required for full compatibility with modern S80 traction and stability control systems.

Why GeoBrakes for the Volvo S80 ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Volvo S80 wheel speed sensors. A sensor that generates the correct frequency for your S80 ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Volvo S80. Every sensor in the GeoBrakes catalogue is matched to the Volvo S80 through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your S80.

Frequently Asked Questions - Volvo S80 ABS Wheel Speed Sensor

Can I drive my Volvo S80 with a faulty ABS wheel speed sensor?

You can drive the Volvo S80 with a failed ABS sensor, but the anti-lock braking system on your S80 will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Volvo S80. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Volvo S80?

Use the GeoBrakes vehicle selector and enter the Volvo S80 year, make, and model. The system displays only the sensors confirmed to fit the Volvo S80, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your S80 to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Volvo S80 at the same time?

No. ABS wheel speed sensors on the Volvo S80 are independent components and only the failed unit needs to be replaced. However, if your S80 has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Volvo S80 sensors for corrosion while the wheel is removed.