Standard/OEIn stock
$207.27
10 items in stock
Quality For FREE Shipping
KBC-100300• Rear• Disc Brake Caliper Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake caliper kits confirmed to fit the Volvo C70, pairing a replacement caliper at the correct left or right hand specification for the C70 with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Volvo C70 is restored in a single service. Every kit is confirmed for the Volvo C70 exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OE$207.27
10 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Volvo C70 seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your C70 keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Volvo C70 is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Volvo C70 together.
The kit for your Volvo C70 includes the disc brake caliper at the correct left or right hand specification for the C70, either new OEM-spec or quality remanufactured to the Volvo C70 piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the C70 caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Volvo C70, brake lubricant for correct pin and shim installation on your C70, and copper washers or banjo bolt seals for the brake hose connection where required by the Volvo C70 application.
A caliper kit is the right call for the Volvo C70 in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your C70 are already compromised. During a high-mileage C70 overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Volvo C70 are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the C70 brake pad renders the friction material permanently ineffective on your Volvo C70.
New OEM-specification calipers for the Volvo C70 are manufactured from fresh materials with no prior service history, the strongest choice for C70 vehicles in high-corrosion environments. Remanufactured calipers use original Volvo C70 housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most C70 replacement applications.
Calipers for the Volvo C70 are the most position-specific brake component in the catalogue. Left and right calipers for the C70 are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Volvo C70 exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Volvo C70 at the same time?
It is strongly recommended. If one caliper on the Volvo C70 has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your C70. Replacing both restores balanced, even braking and eliminates the risk of the second C70 caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Volvo C70 after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Volvo C70 to install the new caliper allows air to enter. After installation, the brake circuit on the C70 must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Volvo C70.
What is the difference between a new and remanufactured caliper in the Volvo C70 kit?
A new caliper for the Volvo C70 has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original C70 housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Volvo C70 applications.