Standard/OE$37.18
10 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks a complete range of passive and active ABS wheel speed sensors confirmed to fit the Volvo C30, each sourced to OEM specifications for direct-fit installation and reliable ABS performance on your C30. Every Volvo C30 sensor is compatible with traction control and stability control systems.
Standard/OE$37.18
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Your Volvo C30 ABS wheel speed sensor is the component that makes anti-lock braking possible on your C30. It monitors the rotational speed of each wheel in real time and sends that data to the Volvo C30 ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your C30, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Volvo C30 wheel speed data is reaching the module.
The ABS wheel speed sensor on the Volvo C30 is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your C30. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the C30 ABS module interprets as wheel speed. On most modern Volvo C30 vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple C30 systems simultaneously.
GeoBrakes stocks both passive and active ABS wheel speed sensors for the Volvo C30. Passive sensors use an analog signal and are found on older C30 vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Volvo C30 vehicles manufactured after the mid-2000s and are required for full compatibility with modern C30 traction and stability control systems.
Signal accuracy matters as much as fitment with Volvo C30 wheel speed sensors. A sensor that generates the correct frequency for your C30 ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Volvo C30. Every sensor in the GeoBrakes catalogue is matched to the Volvo C30 through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your C30.
Can I drive my Volvo C30 with a faulty ABS wheel speed sensor?
You can drive the Volvo C30 with a failed ABS sensor, but the anti-lock braking system on your C30 will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Volvo C30. Replacing a failed sensor promptly is strongly recommended, particularly before winter.
How do I find the right ABS sensor for my Volvo C30?
Use the GeoBrakes vehicle selector and enter the Volvo C30 year, make, and model. The system displays only the sensors confirmed to fit the Volvo C30, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your C30 to avoid receiving the wrong unit.
Do I need to replace all four ABS sensors on my Volvo C30 at the same time?
No. ABS wheel speed sensors on the Volvo C30 are independent components and only the failed unit needs to be replaced. However, if your C30 has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Volvo C30 sensors for corrosion while the wheel is removed.