OE PremiumAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks the widest selection of disc brake pads confirmed to fit the Volvo 240, ceramic and semi-metallic formulations engineered for your 240 and every American driving condition, from sub-zero cold starts to mountain highway descents. Every Volvo 240 brake pad is sourced to OEM or better specifications.
OE PremiumSelect your vehicle to see compatible products and accurate pricing
Disc brake pads are the most frequently replaced component in your Volvo 240 braking system. The friction material your 240 calipers press against the rotor surface wears down with every stop, and the right pad formulation for your Volvo 240, your driving style, and American climate directly affects your stopping distance, rotor lifespan, brake noise, and dust output.
A Volvo 240 disc brake pad is a steel backing plate bonded to a friction material compound. When you press the brake pedal on your 240, hydraulic pressure forces the caliper pistons to squeeze the pads against the spinning rotor, converting kinetic energy into heat and slowing your Volvo 240. The friction material wears gradually and must be replaced when it reaches the minimum safe thickness, typically 3mm, to maintain full stopping performance on your 240.
Ceramic Brake Pads for the Volvo 240
Ceramic pads are the premium everyday choice for most Volvo 240 drivers. Formulated from a dense ceramic compound, 240 ceramic pads maintain consistent friction effectiveness across a wide temperature range, including cold starts on your Volvo 240 at sub-zero temperatures. They produce minimal dust, run quieter in stop-and-go city traffic on the 240, and are significantly gentler on Volvo 240 rotor surfaces than metallic alternatives.
Semi-Metallic Brake Pads for the Volvo 240
Semi-metallic pads excel under sustained heat loads on the Volvo 240. They are the preferred choice for 240 trucks and SUVs used for towing, and performance Volvo 240 vehicles where braking generates high sustained temperatures. Semi-metallic pads provide more aggressive stopping bite at high temperatures on your Volvo 240, at the cost of slightly more noise and dust in everyday driving.
Our brake pad selection for the Volvo 240 is curated specifically for American road and climate conditions. Every ceramic pad confirmed for the Volvo 240 in our catalogue is evaluated for cold-weather friction effectiveness on your 240, not just room-temperature lab specs. Brands including Akebono, EBC, and Raybestos are stocked as authorized retailer products for the Volvo 240, meaning full manufacturer warranty and zero grey-market risk on every 240 purchase.
How often should I replace my Volvo 240 disc brake pads?
Most Volvo 240 brake pads last between 40,000 and 70,000 kilometres, but this varies based on driving style and conditions. American city driving tends to wear 240 pads faster than highway driving. Inspect Volvo 240 pads at every oil change and replace when friction material reaches 3mm or less.
Should I replace front and rear brake pads on my Volvo 240 at the same time?
Not necessarily. Front brakes on the Volvo 240 handle 60 to 70 percent of braking force and typically wear faster. Always replace pads as an axle pair on the 240, both left and right on the same axle, to maintain even braking force.
Are ceramic or semi-metallic pads better for my Volvo 240 in American winters?
Ceramic pads are the better everyday choice for most Volvo 240 drivers. For 240 drivers who tow regularly or drive performance Volvo 240 vehicles, semi-metallic pads deliver superior stopping bite and heat resistance under demanding conditions.