Volkswagen Transporter ABS Wheel Speed Sensor in US

Your Volkswagen Transporter ABS wheel speed sensor is the component that makes anti-lock braking possible on your Transporter. It monitors the rotational speed of each wheel in real time and sends that data to the Volkswagen Transporter ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Transporter, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Volkswagen Transporter wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Volkswagen Transporter

The ABS wheel speed sensor on the Volkswagen Transporter is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Transporter. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Transporter ABS module interprets as wheel speed. On most modern Volkswagen Transporter vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Transporter systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Volkswagen Transporter

• ABS warning light on your Volkswagen Transporter dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Transporter ABS light
• ABS activating on your Volkswagen Transporter during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Transporter, wheels lock under hard braking on wet or icy roads
• Speedometer on your Volkswagen Transporter reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Volkswagen Transporter ABS control module

Passive vs. Active ABS Sensors for the Volkswagen Transporter

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Volkswagen Transporter. Passive sensors use an analog signal and are found on older Transporter vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Volkswagen Transporter vehicles manufactured after the mid-2000s and are required for full compatibility with modern Transporter traction and stability control systems.

Why GeoBrakes for the Volkswagen Transporter ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Volkswagen Transporter wheel speed sensors. A sensor that generates the correct frequency for your Transporter ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Volkswagen Transporter. Every sensor in the GeoBrakes catalogue is matched to the Volkswagen Transporter through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Transporter.

Frequently Asked Questions - Volkswagen Transporter ABS Wheel Speed Sensor

Can I drive my Volkswagen Transporter with a faulty ABS wheel speed sensor?

You can drive the Volkswagen Transporter with a failed ABS sensor, but the anti-lock braking system on your Transporter will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Volkswagen Transporter. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Volkswagen Transporter?

Use the GeoBrakes vehicle selector and enter the Volkswagen Transporter year, make, and model. The system displays only the sensors confirmed to fit the Volkswagen Transporter, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Transporter to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Volkswagen Transporter at the same time?

No. ABS wheel speed sensors on the Volkswagen Transporter are independent components and only the failed unit needs to be replaced. However, if your Transporter has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Volkswagen Transporter sensors for corrosion while the wheel is removed.