Volkswagen Eos ABS Wheel Speed Sensor in US

Your Volkswagen Eos ABS wheel speed sensor is the component that makes anti-lock braking possible on your Eos. It monitors the rotational speed of each wheel in real time and sends that data to the Volkswagen Eos ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Eos, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Volkswagen Eos wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Volkswagen Eos

The ABS wheel speed sensor on the Volkswagen Eos is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Eos. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Eos ABS module interprets as wheel speed. On most modern Volkswagen Eos vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Eos systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Volkswagen Eos

• ABS warning light on your Volkswagen Eos dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Eos ABS light
• ABS activating on your Volkswagen Eos during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Eos, wheels lock under hard braking on wet or icy roads
• Speedometer on your Volkswagen Eos reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Volkswagen Eos ABS control module

Passive vs. Active ABS Sensors for the Volkswagen Eos

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Volkswagen Eos. Passive sensors use an analog signal and are found on older Eos vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Volkswagen Eos vehicles manufactured after the mid-2000s and are required for full compatibility with modern Eos traction and stability control systems.

Why GeoBrakes for the Volkswagen Eos ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Volkswagen Eos wheel speed sensors. A sensor that generates the correct frequency for your Eos ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Volkswagen Eos. Every sensor in the GeoBrakes catalogue is matched to the Volkswagen Eos through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Eos.

Frequently Asked Questions - Volkswagen Eos ABS Wheel Speed Sensor

Can I drive my Volkswagen Eos with a faulty ABS wheel speed sensor?

You can drive the Volkswagen Eos with a failed ABS sensor, but the anti-lock braking system on your Eos will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Volkswagen Eos. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Volkswagen Eos?

Use the GeoBrakes vehicle selector and enter the Volkswagen Eos year, make, and model. The system displays only the sensors confirmed to fit the Volkswagen Eos, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Eos to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Volkswagen Eos at the same time?

No. ABS wheel speed sensors on the Volkswagen Eos are independent components and only the failed unit needs to be replaced. However, if your Eos has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Volkswagen Eos sensors for corrosion while the wheel is removed.