Volkswagen Cabrio ABS Wheel Speed Sensor in US

Your Volkswagen Cabrio ABS wheel speed sensor is the component that makes anti-lock braking possible on your Cabrio. It monitors the rotational speed of each wheel in real time and sends that data to the Volkswagen Cabrio ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Cabrio, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Volkswagen Cabrio wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Volkswagen Cabrio

The ABS wheel speed sensor on the Volkswagen Cabrio is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Cabrio. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Cabrio ABS module interprets as wheel speed. On most modern Volkswagen Cabrio vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Cabrio systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Volkswagen Cabrio

• ABS warning light on your Volkswagen Cabrio dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Cabrio ABS light
• ABS activating on your Volkswagen Cabrio during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Cabrio, wheels lock under hard braking on wet or icy roads
• Speedometer on your Volkswagen Cabrio reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Volkswagen Cabrio ABS control module

Passive vs. Active ABS Sensors for the Volkswagen Cabrio

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Volkswagen Cabrio. Passive sensors use an analog signal and are found on older Cabrio vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Volkswagen Cabrio vehicles manufactured after the mid-2000s and are required for full compatibility with modern Cabrio traction and stability control systems.

Why GeoBrakes for the Volkswagen Cabrio ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Volkswagen Cabrio wheel speed sensors. A sensor that generates the correct frequency for your Cabrio ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Volkswagen Cabrio. Every sensor in the GeoBrakes catalogue is matched to the Volkswagen Cabrio through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Cabrio.

Frequently Asked Questions - Volkswagen Cabrio ABS Wheel Speed Sensor

Can I drive my Volkswagen Cabrio with a faulty ABS wheel speed sensor?

You can drive the Volkswagen Cabrio with a failed ABS sensor, but the anti-lock braking system on your Cabrio will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Volkswagen Cabrio. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Volkswagen Cabrio?

Use the GeoBrakes vehicle selector and enter the Volkswagen Cabrio year, make, and model. The system displays only the sensors confirmed to fit the Volkswagen Cabrio, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Cabrio to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Volkswagen Cabrio at the same time?

No. ABS wheel speed sensors on the Volkswagen Cabrio are independent components and only the failed unit needs to be replaced. However, if your Cabrio has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Volkswagen Cabrio sensors for corrosion while the wheel is removed.