Standard/OEIn stock
$241.49
7 items in stock
Quality For FREE Shipping
KBC-100744• Rear• Disc Brake Caliper Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake caliper kits confirmed to fit the Volkswagen Atlas Cross Sport, pairing a replacement caliper at the correct left or right hand specification for the Atlas Cross Sport with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Volkswagen Atlas Cross Sport is restored in a single service. Every kit is confirmed for the Volkswagen Atlas Cross Sport exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OE$241.49
7 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Volkswagen Atlas Cross Sport seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Atlas Cross Sport keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Volkswagen Atlas Cross Sport is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Volkswagen Atlas Cross Sport together.
The kit for your Volkswagen Atlas Cross Sport includes the disc brake caliper at the correct left or right hand specification for the Atlas Cross Sport, either new OEM-spec or quality remanufactured to the Volkswagen Atlas Cross Sport piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Atlas Cross Sport caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Volkswagen Atlas Cross Sport, brake lubricant for correct pin and shim installation on your Atlas Cross Sport, and copper washers or banjo bolt seals for the brake hose connection where required by the Volkswagen Atlas Cross Sport application.
A caliper kit is the right call for the Volkswagen Atlas Cross Sport in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Atlas Cross Sport are already compromised. During a high-mileage Atlas Cross Sport overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Volkswagen Atlas Cross Sport are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Atlas Cross Sport brake pad renders the friction material permanently ineffective on your Volkswagen Atlas Cross Sport.
New OEM-specification calipers for the Volkswagen Atlas Cross Sport are manufactured from fresh materials with no prior service history, the strongest choice for Atlas Cross Sport vehicles in high-corrosion environments. Remanufactured calipers use original Volkswagen Atlas Cross Sport housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Atlas Cross Sport replacement applications.
Calipers for the Volkswagen Atlas Cross Sport are the most position-specific brake component in the catalogue. Left and right calipers for the Atlas Cross Sport are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Volkswagen Atlas Cross Sport exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Volkswagen Atlas Cross Sport at the same time?
It is strongly recommended. If one caliper on the Volkswagen Atlas Cross Sport has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Atlas Cross Sport. Replacing both restores balanced, even braking and eliminates the risk of the second Atlas Cross Sport caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Volkswagen Atlas Cross Sport after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Volkswagen Atlas Cross Sport to install the new caliper allows air to enter. After installation, the brake circuit on the Atlas Cross Sport must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Volkswagen Atlas Cross Sport.
What is the difference between a new and remanufactured caliper in the Volkswagen Atlas Cross Sport kit?
A new caliper for the Volkswagen Atlas Cross Sport has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Atlas Cross Sport housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Volkswagen Atlas Cross Sport applications.