Toyota Yaris Disc Brake Rotor and Hub Assembly Kit in US

On Toyota Yaris vehicles where the brake rotor and wheel hub share a single integrated casting, a rotor and hub assembly kit is the most complete way to restore full brake corner performance on your Yaris. When a seized caliper damages the Yaris rotor surface, or when hub bearing noise develops alongside worn rotors on your Toyota Yaris, all friction and hub components require replacement simultaneously.

Why the Toyota Yaris Needs a Kit Rather Than Individual Components

New brake pads on your Toyota Yaris must bed into the rotor surface during the first 200 to 300 kilometres. When the pad compound and rotor surface finish are mismatched on the Toyota Yaris, bedding-in is inconsistent, producing noise, vibration, and uneven wear. A GeoBrakes kit pairs pad and rotor from the same specification set for the Toyota Yaris, ensuring the smoothest possible break-in and the most consistent long-term friction performance on your Yaris.

What Is Included in the Toyota Yaris Rotor and Hub Assembly Kit

The kit for your Toyota Yaris includes the integrated rotor and hub assembly at OEM specification for the Yaris hub geometry, brake pads in ceramic or semi-metallic formulation matched to the Toyota Yaris rotor surface finish, caliper hardware with slide pins and anti-rattle clips for correct caliper operation on your Yaris, and rotor mounting hardware where required by the Toyota Yaris application.

Signs Your Toyota Yaris Rotor and Hub Assembly Kit Is Due

• Yaris rotor surfaces scored, deeply grooved, or below minimum thickness specification
• Wheel bearing noise on your Toyota Yaris, humming or rumbling changing pitch during cornering
• Excessive wheel play or looseness on the Yaris detected during a manual push-pull inspection
• Steering wheel or floor vibration on your Toyota Yaris at highway speed from rotor runout
• ABS warning light on your Yaris caused by hub bearing affecting the wheel speed sensor air gap
• Damaged or stripped wheel studs on the Toyota Yaris requiring hub replacement alongside rotor service

Why GeoBrakes for the Toyota Yaris Rotor and Hub Assembly Kit

Rotor and hub assemblies for the Toyota Yaris are among the most vehicle-specific brake components in the catalogue. Hub bolt circle, rotor diameter, hub bore, and the wheel speed sensor interface are all specific to the Toyota Yaris. Our vehicle selector confirms the correct kit for the Toyota Yaris left and right positions before purchase, with full manufacturer warranty coverage across all included components for your Yaris.

Frequently Asked Questions - Toyota Yaris Rotor and Hub Assembly Kits

Should I replace rotor and hub assembly kits on both sides of my Toyota Yaris?

Yes. Replacing both left and right on the same axle of your Toyota Yaris ensures balanced braking, even wear, and consistent vehicle handling. Both assemblies have experienced the same service conditions on the Yaris and are at a comparable stage of wear.

Can I use the pads from the kit with my existing Toyota Yaris rotors?

While the pads will physically fit existing Yaris rotors, it is strongly recommended to install new pads on a new rotor surface. Worn Toyota Yaris rotors have an uneven profile that prevents new pads from bedding in correctly, producing vibration, noise, and accelerated pad wear on your Yaris.

Does the Toyota Yaris kit include the wheel bearing?

This depends on the specific Toyota Yaris application. On many Yaris front-wheel-drive platforms, the wheel bearing is a separate component not included in the rotor-hub casting. Use the GeoBrakes vehicle selector to confirm what is included in the kit for your Toyota Yaris.