Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade brake drums confirmed to fit the Toyota Solara, the cast-iron components that form the friction surface for the Solara drum brake shoes. Available in standard and corrosion-coated configurations for your Solara, every drum is manufactured to the correct inner diameter, wall thickness, and surface finish for the Toyota Solara
Standard/OESelect your vehicle to see compatible products and accurate pricing
Standard/OESelect your vehicle to see compatible products and accurate pricing
The brake drum on the Toyota Solara is the rotating cast-iron bowl that the Solara drum brake shoes press against to slow your vehicle. Mounted to the rear axle hub of your Toyota Solara, it spins with the wheel and provides the friction surface that the shoes contact under braking. Unlike brake rotors, which can be visually inspected from outside the wheel on many Solara vehicles, Toyota Solara brake drums fully enclose the shoe assembly, which means wear and damage often goes unnoticed until braking performance on the Toyota Solara is noticeably affected.
Standard OEM-Grade Drums for the Toyota Solara
Standard OEM-grade cast-iron drums for the Toyota Solara are manufactured to the original equipment diameter, wall thickness, and surface finish specification for your Solara. They are the direct replacement for the factory Solara drum with no modification required.
Coated Brake Drums for the Toyota Solara
Coated Toyota Solara brake drums feature a corrosion-resistant coating applied to the external drum surfaces of your Solara, the hat section, outer wall, and wheel mounting face. Surface rust is a common issue on Toyota Solara drum brake vehicles in US, particularly during periods of non-use in winter when moisture and salt collect inside the Solara wheel well. A coated drum on your Toyota Solara resists surface rust that can transfer to the wheel mounting face, making future drum removal significantly easier at the next Solara brake service.
Toyota Solara brake drum replacement requires matching the correct inner diameter, wall thickness, bolt circle, hub bore, and drum offset for your Solara. Errors in any of these dimensions produce incorrect shoe-to-drum clearance, uneven wear, and braking problems on the Toyota Solara. Our vehicle selector eliminates those risks by confirming the correct drum for the Toyota Solara exact year, make, model, and axle. Coated Solara drum options are available for vehicles with heavy salt exposure.
How long do brake drums last on a Toyota Solara?
Toyota Solara brake drums typically last 150,000 to 200,000 kilometres with periodic resurfacing, significantly longer than disc brake rotors on the Solara. Each resurfacing removes material from the Solara drum and reduces wall thickness. Once the Toyota Solara drum reaches its maximum allowable inner diameter, it must be replaced rather than turned again.
Should I replace brake drums on my Toyota Solara in pairs?
Yes. Replace both Toyota Solara drums on the same axle to maintain balanced braking. Drums of different inner diameters on the Solara create uneven friction forces, causing the Toyota Solara to pull to the fresher-drum side during braking.
Should I replace drums and shoes at the same time on my Toyota Solara?
Yes, it is strongly recommended for the Toyota Solara. New shoes on a scored or out-of-round Solara drum wear unevenly from day one. New Toyota Solara drums with old shoes that have worn to match the old drum surface will contact the new bore incorrectly. Replacing both together on the Solara ensures proper break-in and maximum service life from both components.