Toyota Prius Disc Brake Caliper in US

The disc brake caliper on the Toyota Prius is the hydraulic clamp at the centre of your Prius disc brake system. Every time you press the brake pedal on your Toyota Prius, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Prius interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Toyota Prius

• Toyota Prius pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Prius feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Toyota Prius axle wears significantly faster than its partner
• Brake drag on the Toyota Prius, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Prius caliper body or around the piston boot
• Grinding or scraping from one Toyota Prius wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Toyota Prius

New OEM-Specification Calipers for the Toyota Prius

New OEM-specification calipers for the Toyota Prius are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Prius factory part. They offer the longest service life on your Toyota Prius and are the strongest choice for higher-mileage Prius vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Toyota Prius

Remanufactured calipers for the Toyota Prius are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Toyota Prius replacement applications and offer excellent value.

Why GeoBrakes for the Toyota Prius Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Toyota Prius to give you the right option for your Prius and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Toyota Prius, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Toyota Prius year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Toyota Prius Disc Brake Caliper

Should I replace brake calipers on my Toyota Prius in pairs?

It is generally recommended to replace calipers as an axle pair on the Toyota Prius, both left and right on the same axle, to maintain balanced braking. If one Prius caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Toyota Prius in US?

Toyota Prius calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Prius caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Toyota Prius well before that figure.

Can a sticking caliper on my Toyota Prius damage my brake pads and rotors?

Yes. A Prius caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Toyota Prius. This rapidly wears both the pad and rotor surface on your Prius and generates enough heat buildup to damage adjacent components over time.