Standard/OEIn stock
$172.90
10 items in stock
Quality For FREE Shipping
KBC-100680• Front• Disc Brake Caliper Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake caliper kits confirmed to fit the Suzuki Sx4 Crossover, pairing a replacement caliper at the correct left or right hand specification for the Sx4 Crossover with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Suzuki Sx4 Crossover is restored in a single service. Every kit is confirmed for the Suzuki Sx4 Crossover exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OE$172.90
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$191.40
5 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$364.31
5 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Suzuki Sx4 Crossover seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Sx4 Crossover keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Suzuki Sx4 Crossover is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Suzuki Sx4 Crossover together.
The kit for your Suzuki Sx4 Crossover includes the disc brake caliper at the correct left or right hand specification for the Sx4 Crossover, either new OEM-spec or quality remanufactured to the Suzuki Sx4 Crossover piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Sx4 Crossover caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Suzuki Sx4 Crossover, brake lubricant for correct pin and shim installation on your Sx4 Crossover, and copper washers or banjo bolt seals for the brake hose connection where required by the Suzuki Sx4 Crossover application.
A caliper kit is the right call for the Suzuki Sx4 Crossover in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Sx4 Crossover are already compromised. During a high-mileage Sx4 Crossover overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Suzuki Sx4 Crossover are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Sx4 Crossover brake pad renders the friction material permanently ineffective on your Suzuki Sx4 Crossover.
New OEM-specification calipers for the Suzuki Sx4 Crossover are manufactured from fresh materials with no prior service history, the strongest choice for Sx4 Crossover vehicles in high-corrosion environments. Remanufactured calipers use original Suzuki Sx4 Crossover housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Sx4 Crossover replacement applications.
Calipers for the Suzuki Sx4 Crossover are the most position-specific brake component in the catalogue. Left and right calipers for the Sx4 Crossover are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Suzuki Sx4 Crossover exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Suzuki Sx4 Crossover at the same time?
It is strongly recommended. If one caliper on the Suzuki Sx4 Crossover has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Sx4 Crossover. Replacing both restores balanced, even braking and eliminates the risk of the second Sx4 Crossover caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Suzuki Sx4 Crossover after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Suzuki Sx4 Crossover to install the new caliper allows air to enter. After installation, the brake circuit on the Sx4 Crossover must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Suzuki Sx4 Crossover.
What is the difference between a new and remanufactured caliper in the Suzuki Sx4 Crossover kit?
A new caliper for the Suzuki Sx4 Crossover has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Sx4 Crossover housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Suzuki Sx4 Crossover applications.