Subaru Xv Crosstrek ABS Wheel Speed Sensor in US

Your Subaru Xv Crosstrek ABS wheel speed sensor is the component that makes anti-lock braking possible on your Xv Crosstrek. It monitors the rotational speed of each wheel in real time and sends that data to the Subaru Xv Crosstrek ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Xv Crosstrek, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Subaru Xv Crosstrek wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Subaru Xv Crosstrek

The ABS wheel speed sensor on the Subaru Xv Crosstrek is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Xv Crosstrek. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Xv Crosstrek ABS module interprets as wheel speed. On most modern Subaru Xv Crosstrek vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Xv Crosstrek systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Subaru Xv Crosstrek

• ABS warning light on your Subaru Xv Crosstrek dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Xv Crosstrek ABS light
• ABS activating on your Subaru Xv Crosstrek during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Xv Crosstrek, wheels lock under hard braking on wet or icy roads
• Speedometer on your Subaru Xv Crosstrek reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Subaru Xv Crosstrek ABS control module

Passive vs. Active ABS Sensors for the Subaru Xv Crosstrek

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Subaru Xv Crosstrek. Passive sensors use an analog signal and are found on older Xv Crosstrek vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Subaru Xv Crosstrek vehicles manufactured after the mid-2000s and are required for full compatibility with modern Xv Crosstrek traction and stability control systems.

Why GeoBrakes for the Subaru Xv Crosstrek ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Subaru Xv Crosstrek wheel speed sensors. A sensor that generates the correct frequency for your Xv Crosstrek ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Subaru Xv Crosstrek. Every sensor in the GeoBrakes catalogue is matched to the Subaru Xv Crosstrek through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Xv Crosstrek.

Frequently Asked Questions - Subaru Xv Crosstrek ABS Wheel Speed Sensor

Can I drive my Subaru Xv Crosstrek with a faulty ABS wheel speed sensor?

You can drive the Subaru Xv Crosstrek with a failed ABS sensor, but the anti-lock braking system on your Xv Crosstrek will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Subaru Xv Crosstrek. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Subaru Xv Crosstrek?

Use the GeoBrakes vehicle selector and enter the Subaru Xv Crosstrek year, make, and model. The system displays only the sensors confirmed to fit the Subaru Xv Crosstrek, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Xv Crosstrek to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Subaru Xv Crosstrek at the same time?

No. ABS wheel speed sensors on the Subaru Xv Crosstrek are independent components and only the failed unit needs to be replaced. However, if your Xv Crosstrek has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Subaru Xv Crosstrek sensors for corrosion while the wheel is removed.