Subaru Xv ABS Wheel Speed Sensor in US

Your Subaru Xv ABS wheel speed sensor is the component that makes anti-lock braking possible on your Xv. It monitors the rotational speed of each wheel in real time and sends that data to the Subaru Xv ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Xv, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Subaru Xv wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Subaru Xv

The ABS wheel speed sensor on the Subaru Xv is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Xv. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Xv ABS module interprets as wheel speed. On most modern Subaru Xv vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Xv systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Subaru Xv

• ABS warning light on your Subaru Xv dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Xv ABS light
• ABS activating on your Subaru Xv during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Xv, wheels lock under hard braking on wet or icy roads
• Speedometer on your Subaru Xv reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Subaru Xv ABS control module

Passive vs. Active ABS Sensors for the Subaru Xv

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Subaru Xv. Passive sensors use an analog signal and are found on older Xv vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Subaru Xv vehicles manufactured after the mid-2000s and are required for full compatibility with modern Xv traction and stability control systems.

Why GeoBrakes for the Subaru Xv ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Subaru Xv wheel speed sensors. A sensor that generates the correct frequency for your Xv ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Subaru Xv. Every sensor in the GeoBrakes catalogue is matched to the Subaru Xv through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Xv.

Frequently Asked Questions - Subaru Xv ABS Wheel Speed Sensor

Can I drive my Subaru Xv with a faulty ABS wheel speed sensor?

You can drive the Subaru Xv with a failed ABS sensor, but the anti-lock braking system on your Xv will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Subaru Xv. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Subaru Xv?

Use the GeoBrakes vehicle selector and enter the Subaru Xv year, make, and model. The system displays only the sensors confirmed to fit the Subaru Xv, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Xv to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Subaru Xv at the same time?

No. ABS wheel speed sensors on the Subaru Xv are independent components and only the failed unit needs to be replaced. However, if your Xv has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Subaru Xv sensors for corrosion while the wheel is removed.