Standard/OE$70.90
8 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks a complete range of passive and active ABS wheel speed sensors confirmed to fit the Subaru Tribeca, each sourced to OEM specifications for direct-fit installation and reliable ABS performance on your Tribeca. Every Subaru Tribeca sensor is compatible with traction control and stability control systems.
Standard/OE$70.90
8 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$71.73
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Your Subaru Tribeca ABS wheel speed sensor is the component that makes anti-lock braking possible on your Tribeca. It monitors the rotational speed of each wheel in real time and sends that data to the Subaru Tribeca ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Tribeca, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Subaru Tribeca wheel speed data is reaching the module.
The ABS wheel speed sensor on the Subaru Tribeca is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Tribeca. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Tribeca ABS module interprets as wheel speed. On most modern Subaru Tribeca vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Tribeca systems simultaneously.
GeoBrakes stocks both passive and active ABS wheel speed sensors for the Subaru Tribeca. Passive sensors use an analog signal and are found on older Tribeca vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Subaru Tribeca vehicles manufactured after the mid-2000s and are required for full compatibility with modern Tribeca traction and stability control systems.
Signal accuracy matters as much as fitment with Subaru Tribeca wheel speed sensors. A sensor that generates the correct frequency for your Tribeca ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Subaru Tribeca. Every sensor in the GeoBrakes catalogue is matched to the Subaru Tribeca through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Tribeca.
Can I drive my Subaru Tribeca with a faulty ABS wheel speed sensor?
You can drive the Subaru Tribeca with a failed ABS sensor, but the anti-lock braking system on your Tribeca will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Subaru Tribeca. Replacing a failed sensor promptly is strongly recommended, particularly before winter.
How do I find the right ABS sensor for my Subaru Tribeca?
Use the GeoBrakes vehicle selector and enter the Subaru Tribeca year, make, and model. The system displays only the sensors confirmed to fit the Subaru Tribeca, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Tribeca to avoid receiving the wrong unit.
Do I need to replace all four ABS sensors on my Subaru Tribeca at the same time?
No. ABS wheel speed sensors on the Subaru Tribeca are independent components and only the failed unit needs to be replaced. However, if your Tribeca has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Subaru Tribeca sensors for corrosion while the wheel is removed.