Subaru Forester Disc Brake Caliper in US

The disc brake caliper on the Subaru Forester is the hydraulic clamp at the centre of your Forester disc brake system. Every time you press the brake pedal on your Subaru Forester, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Forester interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Subaru Forester

• Subaru Forester pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Forester feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Subaru Forester axle wears significantly faster than its partner
• Brake drag on the Subaru Forester, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Forester caliper body or around the piston boot
• Grinding or scraping from one Subaru Forester wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Subaru Forester

New OEM-Specification Calipers for the Subaru Forester

New OEM-specification calipers for the Subaru Forester are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Forester factory part. They offer the longest service life on your Subaru Forester and are the strongest choice for higher-mileage Forester vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Subaru Forester

Remanufactured calipers for the Subaru Forester are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Subaru Forester replacement applications and offer excellent value.

Why GeoBrakes for the Subaru Forester Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Subaru Forester to give you the right option for your Forester and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Subaru Forester, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Subaru Forester year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Subaru Forester Disc Brake Caliper

Should I replace brake calipers on my Subaru Forester in pairs?

It is generally recommended to replace calipers as an axle pair on the Subaru Forester, both left and right on the same axle, to maintain balanced braking. If one Forester caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Subaru Forester in US?

Subaru Forester calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Forester caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Subaru Forester well before that figure.

Can a sticking caliper on my Subaru Forester damage my brake pads and rotors?

Yes. A Forester caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Subaru Forester. This rapidly wears both the pad and rotor surface on your Forester and generates enough heat buildup to damage adjacent components over time.