Standard/OEIn stock
$75.34
5 items in stock
Quality For FREE Shipping
KSE-100319• Rear• Disc Brake Pad Wear Sensor Kits
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake pad wear sensor kits confirmed to fit the Rolls Royce Wraith, combining the wear sensor probe manufactured to the exact OEM probe length and contact resistance for the Wraith with connector hardware, retaining clips, and in pad-inclusive configurations the brake pads themselves, so the complete brake monitoring system on your Rolls Royce Wraith is restored correctly in a single service.
Standard/OE$75.34
5 items in stock
Select your vehicle to see compatible products and accurate pricing
A brake pad wear sensor kit for the Rolls Royce Wraith does one critical thing that a pad change alone cannot: it ensures the brake warning light on your Wraith dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Rolls Royce Wraith, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your Wraith. On Rolls Royce Wraith vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the Wraith.
The kit for your Rolls Royce Wraith includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the Wraith monitoring circuit, the wiring connector mating with the Rolls Royce Wraith brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the Wraith brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Rolls Royce Wraith with sensor pre-assembled at factory-correct position on the Wraith pad.
A brake pad wear sensor on the Rolls Royce Wraith is a calibrated component manufactured to trigger the Wraith brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Rolls Royce Wraith, sending drivers for an unnecessary brake service with significant Wraith pad life remaining. Too short and it triggers late or not at all on the Wraith, leaving the driver with no advance warning as the Rolls Royce Wraith pads approach the metal backing plate.
Wear sensor compatibility for the Rolls Royce Wraith is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the Wraith brake monitoring circuit exactly. A wrong-spec sensor on your Rolls Royce Wraith either triggers warnings at the wrong pad thickness or fails to connect to the existing Wraith harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Rolls Royce Wraith exact year and model, with front and rear positions listed separately.
How do I know if my Rolls Royce Wraith has electronic brake pad wear sensors?
Check your Rolls Royce Wraith owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Rolls Royce Wraith application requires an electronic sensor kit.
Can I buy the wear sensor separately from the brake pads for my Rolls Royce Wraith?
Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Rolls Royce Wraith. If replacing Wraith pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Rolls Royce Wraith.
Will the brake warning light turn off automatically after installing a new sensor on my Rolls Royce Wraith?
On most Rolls Royce Wraith vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Rolls Royce Wraith European platforms, a diagnostic scan tool reset may be required. Check your Wraith service documentation if the light does not clear after installation.