Ram Promaster 3500 Disc Brake Caliper in US

The disc brake caliper on the Ram Promaster 3500 is the hydraulic clamp at the centre of your Promaster 3500 disc brake system. Every time you press the brake pedal on your Ram Promaster 3500, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Promaster 3500 interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Ram Promaster 3500

• Ram Promaster 3500 pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Promaster 3500 feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Ram Promaster 3500 axle wears significantly faster than its partner
• Brake drag on the Ram Promaster 3500, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Promaster 3500 caliper body or around the piston boot
• Grinding or scraping from one Ram Promaster 3500 wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Ram Promaster 3500

New OEM-Specification Calipers for the Ram Promaster 3500

New OEM-specification calipers for the Ram Promaster 3500 are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Promaster 3500 factory part. They offer the longest service life on your Ram Promaster 3500 and are the strongest choice for higher-mileage Promaster 3500 vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Ram Promaster 3500

Remanufactured calipers for the Ram Promaster 3500 are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Ram Promaster 3500 replacement applications and offer excellent value.

Why GeoBrakes for the Ram Promaster 3500 Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Ram Promaster 3500 to give you the right option for your Promaster 3500 and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Ram Promaster 3500, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Ram Promaster 3500 year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Ram Promaster 3500 Disc Brake Caliper

Should I replace brake calipers on my Ram Promaster 3500 in pairs?

It is generally recommended to replace calipers as an axle pair on the Ram Promaster 3500, both left and right on the same axle, to maintain balanced braking. If one Promaster 3500 caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Ram Promaster 3500 in US?

Ram Promaster 3500 calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Promaster 3500 caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Ram Promaster 3500 well before that figure.

Can a sticking caliper on my Ram Promaster 3500 damage my brake pads and rotors?

Yes. A Promaster 3500 caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Ram Promaster 3500. This rapidly wears both the pad and rotor surface on your Promaster 3500 and generates enough heat buildup to damage adjacent components over time.