Ram C V ABS Wheel Speed Sensor in US

Your Ram C V ABS wheel speed sensor is the component that makes anti-lock braking possible on your C V. It monitors the rotational speed of each wheel in real time and sends that data to the Ram C V ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your C V, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Ram C V wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Ram C V

The ABS wheel speed sensor on the Ram C V is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your C V. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the C V ABS module interprets as wheel speed. On most modern Ram C V vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple C V systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Ram C V

• ABS warning light on your Ram C V dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the C V ABS light
• ABS activating on your Ram C V during normal stops at low speed where it should not engage
• Complete ABS deactivation on the C V, wheels lock under hard braking on wet or icy roads
• Speedometer on your Ram C V reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Ram C V ABS control module

Passive vs. Active ABS Sensors for the Ram C V

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Ram C V. Passive sensors use an analog signal and are found on older C V vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Ram C V vehicles manufactured after the mid-2000s and are required for full compatibility with modern C V traction and stability control systems.

Why GeoBrakes for the Ram C V ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Ram C V wheel speed sensors. A sensor that generates the correct frequency for your C V ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Ram C V. Every sensor in the GeoBrakes catalogue is matched to the Ram C V through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your C V.

Frequently Asked Questions - Ram C V ABS Wheel Speed Sensor

Can I drive my Ram C V with a faulty ABS wheel speed sensor?

You can drive the Ram C V with a failed ABS sensor, but the anti-lock braking system on your C V will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Ram C V. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Ram C V?

Use the GeoBrakes vehicle selector and enter the Ram C V year, make, and model. The system displays only the sensors confirmed to fit the Ram C V, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your C V to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Ram C V at the same time?

No. ABS wheel speed sensors on the Ram C V are independent components and only the failed unit needs to be replaced. However, if your C V has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Ram C V sensors for corrosion while the wheel is removed.