Ram 4000 Disc Brake Caliper in US

The disc brake caliper on the Ram 4000 is the hydraulic clamp at the centre of your 4000 disc brake system. Every time you press the brake pedal on your Ram 4000, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the 4000 interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Ram 4000

• Ram 4000 pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your 4000 feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Ram 4000 axle wears significantly faster than its partner
• Brake drag on the Ram 4000, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the 4000 caliper body or around the piston boot
• Grinding or scraping from one Ram 4000 wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Ram 4000

New OEM-Specification Calipers for the Ram 4000

New OEM-specification calipers for the Ram 4000 are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original 4000 factory part. They offer the longest service life on your Ram 4000 and are the strongest choice for higher-mileage 4000 vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Ram 4000

Remanufactured calipers for the Ram 4000 are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Ram 4000 replacement applications and offer excellent value.

Why GeoBrakes for the Ram 4000 Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Ram 4000 to give you the right option for your 4000 and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Ram 4000, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Ram 4000 year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Ram 4000 Disc Brake Caliper

Should I replace brake calipers on my Ram 4000 in pairs?

It is generally recommended to replace calipers as an axle pair on the Ram 4000, both left and right on the same axle, to maintain balanced braking. If one 4000 caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Ram 4000 in US?

Ram 4000 calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of 4000 caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Ram 4000 well before that figure.

Can a sticking caliper on my Ram 4000 damage my brake pads and rotors?

Yes. A 4000 caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Ram 4000. This rapidly wears both the pad and rotor surface on your 4000 and generates enough heat buildup to damage adjacent components over time.