Porsche 718 Cayman Brake Pad Wear Sensor Kit in US

A brake pad wear sensor kit for the Porsche 718 Cayman does one critical thing that a pad change alone cannot: it ensures the brake warning light on your 718 Cayman dashboard accurately reflects the condition of the next set of brake pads. Without a new sensor on the Porsche 718 Cayman, the warning system is non-functional from day one of the new pads, there is no advance notice for the next replacement cycle on your 718 Cayman. On Porsche 718 Cayman vehicles where a previous service skipped the sensor, the brake warning light may also remain on permanently after new pads are installed on the 718 Cayman.

What Is Included in the Porsche 718 Cayman Brake Pad Wear Sensor Kit

The kit for your Porsche 718 Cayman includes the brake pad wear sensor probe unit manufactured to OEM contact resistance and threshold depth for the 718 Cayman monitoring circuit, the wiring connector mating with the Porsche 718 Cayman brake monitoring harness where required, the retaining clip or mounting bracket securing the sensor to the 718 Cayman brake pad or caliper correctly, and in pad-inclusive kits, the brake pads for the Porsche 718 Cayman with sensor pre-assembled at factory-correct position on the 718 Cayman pad.

Why the Sensor Probe Specification Matters on the Porsche 718 Cayman

A brake pad wear sensor on the Porsche 718 Cayman is a calibrated component manufactured to trigger the 718 Cayman brake warning circuit at a specific remaining pad thickness. Too long and it triggers early on your Porsche 718 Cayman, sending drivers for an unnecessary brake service with significant 718 Cayman pad life remaining. Too short and it triggers late or not at all on the 718 Cayman, leaving the driver with no advance warning as the Porsche 718 Cayman pads approach the metal backing plate.

Signs the Wear Sensor Kit on Your Porsche 718 Cayman Is Due

• Brake pad warning light illuminated on your Porsche 718 Cayman dashboard
• 718 Cayman warning light that stays on after a recent pad change, indicating sensor was not replaced on the Porsche 718 Cayman
• Brake pads on your Porsche 718 Cayman at or approaching minimum thickness on inspection
• Worn sensor probe visible on the 718 Cayman brake pad during a brake service inspection

Why GeoBrakes for the Porsche 718 Cayman Wear Sensor Kit

Wear sensor compatibility for the Porsche 718 Cayman is more exacting than most brake components. Probe length, contact resistance specification, and connector pinout must all match the 718 Cayman brake monitoring circuit exactly. A wrong-spec sensor on your Porsche 718 Cayman either triggers warnings at the wrong pad thickness or fails to connect to the existing 718 Cayman harness. Every kit in the GeoBrakes catalogue is sourced to OEM specification for the Porsche 718 Cayman exact year and model, with front and rear positions listed separately.

Frequently Asked Questions - Porsche 718 Cayman Brake Pad Wear Sensor Kits

How do I know if my Porsche 718 Cayman has electronic brake pad wear sensors?

Check your Porsche 718 Cayman owner's manual for a brake pad warning light in the instrument cluster section. Use the GeoBrakes vehicle selector to confirm whether your Porsche 718 Cayman application requires an electronic sensor kit.

Can I buy the wear sensor separately from the brake pads for my Porsche 718 Cayman?

Yes. GeoBrakes carries sensors as standalone components and as part of sensor kits for the Porsche 718 Cayman. If replacing 718 Cayman pads that did not include a sensor and the existing sensor has already triggered, a standalone sensor or sensor kit is the correct purchase for your Porsche 718 Cayman.

Will the brake warning light turn off automatically after installing a new sensor on my Porsche 718 Cayman?

On most Porsche 718 Cayman vehicles, the brake pad warning light turns off once the new sensor is correctly installed and the ignition is cycled. On some Porsche 718 Cayman European platforms, a diagnostic scan tool reset may be required. Check your 718 Cayman service documentation if the light does not clear after installation.