Pontiac Wave Disc Brake Caliper in US

The disc brake caliper on the Pontiac Wave is the hydraulic clamp at the centre of your Wave disc brake system. Every time you press the brake pedal on your Pontiac Wave, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Wave interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Pontiac Wave

• Pontiac Wave pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Wave feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Pontiac Wave axle wears significantly faster than its partner
• Brake drag on the Pontiac Wave, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Wave caliper body or around the piston boot
• Grinding or scraping from one Pontiac Wave wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Pontiac Wave

New OEM-Specification Calipers for the Pontiac Wave

New OEM-specification calipers for the Pontiac Wave are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Wave factory part. They offer the longest service life on your Pontiac Wave and are the strongest choice for higher-mileage Wave vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Pontiac Wave

Remanufactured calipers for the Pontiac Wave are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Pontiac Wave replacement applications and offer excellent value.

Why GeoBrakes for the Pontiac Wave Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Pontiac Wave to give you the right option for your Wave and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Pontiac Wave, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Pontiac Wave year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Pontiac Wave Disc Brake Caliper

Should I replace brake calipers on my Pontiac Wave in pairs?

It is generally recommended to replace calipers as an axle pair on the Pontiac Wave, both left and right on the same axle, to maintain balanced braking. If one Wave caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Pontiac Wave in US?

Pontiac Wave calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Wave caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Pontiac Wave well before that figure.

Can a sticking caliper on my Pontiac Wave damage my brake pads and rotors?

Yes. A Wave caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Pontiac Wave. This rapidly wears both the pad and rotor surface on your Wave and generates enough heat buildup to damage adjacent components over time.