Pontiac Tempest Brake Drum Kit in US

A brake drum kit for the Pontiac Tempest addresses the most common brake service shortcut: replacing shoes on a worn Tempest drum, or fitting new drums with glazed, worn shoes. Either combination prevents correct break-in on the Pontiac Tempest. New shoes have a specific arc radius that must contact a fresh drum surface across the full lining width on your Tempest. A GeoBrakes drum kit eliminates that incompatibility by delivering matched drums and shoes confirmed for your Pontiac Tempest in a single order.

What Is Included in the Pontiac Tempest Brake Drum Kit

The kit for your Pontiac Tempest includes OEM-spec cast-iron brake drums at the correct inner diameter for the Tempest for both left and right rear wheels, drum brake shoes with OEM-grade friction lining matched to the Pontiac Tempest drum bore and wheel cylinder specification, a brake hardware kit with return springs, hold-down hardware, and self-adjusters specific to the Tempest, and drum retaining hardware where required by the Pontiac Tempest application.

Why American Conditions Make a Full Kit the Right Call for Your Pontiac Tempest

Road salt and freeze-thaw cycles deteriorate every component in the Pontiac Tempest drum brake system over the same service interval. By the time a Tempest drum is worn, the shoes are typically at or near minimum thickness, the hardware is corroded, and the wheel cylinder boots are deteriorating on your Pontiac Tempest. Replacing drums and shoes alone while leaving worn springs and seized adjusters on the Tempest produces a service that underperforms within months.

Signs the Brake Drum Kit on Your Pontiac Tempest Is Due

• Rear brake pulsation or grabbing on your Pontiac Tempest during stops, out-of-round drum bore
• Grinding or scraping from the Tempest rear axle with the parking brake fully released
• Tempest drum inner surface scored or worn to maximum allowable diameter on inspection
• Friction lining at or below 1.5mm on your Pontiac Tempest visible during drum removal
• Parking brake on your Tempest requiring excessive travel before holding on a slope
• Pontiac Tempest pulling to one side under braking, asymmetric drum or shoe condition

Why GeoBrakes for the Pontiac Tempest Brake Drum Kit

Drum and shoe arc radius must match exactly for correct contact geometry on the Pontiac Tempest. An incorrect drum diameter or wrong-spec shoe lining for the Tempest produces immediate uneven wear and noise. Every kit in the GeoBrakes catalogue is assembled for the Pontiac Tempest, drum diameter, shoe arc, and hardware spring rates all confirmed as a matched set specific to the Tempest.

Frequently Asked Questions - Pontiac Tempest Brake Drum Kits

How do I know if I need a basic or full-service kit for my Pontiac Tempest?

A basic kit for the Pontiac Tempest is appropriate when the wheel cylinders have been recently replaced and show no signs of leaking. A full-service kit is the stronger choice during a high-mileage Tempest overhaul, particularly on American Pontiac Tempest vehicles with significant winter salt exposure.

Should I replace drum kits on both rear wheels of my Pontiac Tempest at the same time?

Yes. Always replace drum brake components on the Pontiac Tempest as an axle set, both left and right rear, to maintain balanced braking force. Drums and shoes at different wear stages on the Tempest create uneven rear braking that pulls the vehicle to one side.

Can I install a brake drum kit on my Pontiac Tempest myself?

Rear drum brake service on the Pontiac Tempest is a moderately advanced DIY task. It requires removing the drum, dismantling the shoe assembly on the Tempest, correctly routing return springs, and adjusting shoes to the correct drum clearance. A service manual specific to the Pontiac Tempest is essential.