Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade brake drums confirmed to fit the Pontiac Sunbird, the cast-iron components that form the friction surface for the Sunbird drum brake shoes. Available in standard and corrosion-coated configurations for your Sunbird, every drum is manufactured to the correct inner diameter, wall thickness, and surface finish for the Pontiac Sunbird
Standard/OESelect your vehicle to see compatible products and accurate pricing
The brake drum on the Pontiac Sunbird is the rotating cast-iron bowl that the Sunbird drum brake shoes press against to slow your vehicle. Mounted to the rear axle hub of your Pontiac Sunbird, it spins with the wheel and provides the friction surface that the shoes contact under braking. Unlike brake rotors, which can be visually inspected from outside the wheel on many Sunbird vehicles, Pontiac Sunbird brake drums fully enclose the shoe assembly, which means wear and damage often goes unnoticed until braking performance on the Pontiac Sunbird is noticeably affected.
Standard OEM-Grade Drums for the Pontiac Sunbird
Standard OEM-grade cast-iron drums for the Pontiac Sunbird are manufactured to the original equipment diameter, wall thickness, and surface finish specification for your Sunbird. They are the direct replacement for the factory Sunbird drum with no modification required.
Coated Brake Drums for the Pontiac Sunbird
Coated Pontiac Sunbird brake drums feature a corrosion-resistant coating applied to the external drum surfaces of your Sunbird, the hat section, outer wall, and wheel mounting face. Surface rust is a common issue on Pontiac Sunbird drum brake vehicles in US, particularly during periods of non-use in winter when moisture and salt collect inside the Sunbird wheel well. A coated drum on your Pontiac Sunbird resists surface rust that can transfer to the wheel mounting face, making future drum removal significantly easier at the next Sunbird brake service.
Pontiac Sunbird brake drum replacement requires matching the correct inner diameter, wall thickness, bolt circle, hub bore, and drum offset for your Sunbird. Errors in any of these dimensions produce incorrect shoe-to-drum clearance, uneven wear, and braking problems on the Pontiac Sunbird. Our vehicle selector eliminates those risks by confirming the correct drum for the Pontiac Sunbird exact year, make, model, and axle. Coated Sunbird drum options are available for vehicles with heavy salt exposure.
How long do brake drums last on a Pontiac Sunbird?
Pontiac Sunbird brake drums typically last 150,000 to 200,000 kilometres with periodic resurfacing, significantly longer than disc brake rotors on the Sunbird. Each resurfacing removes material from the Sunbird drum and reduces wall thickness. Once the Pontiac Sunbird drum reaches its maximum allowable inner diameter, it must be replaced rather than turned again.
Should I replace brake drums on my Pontiac Sunbird in pairs?
Yes. Replace both Pontiac Sunbird drums on the same axle to maintain balanced braking. Drums of different inner diameters on the Sunbird create uneven friction forces, causing the Pontiac Sunbird to pull to the fresher-drum side during braking.
Should I replace drums and shoes at the same time on my Pontiac Sunbird?
Yes, it is strongly recommended for the Pontiac Sunbird. New shoes on a scored or out-of-round Sunbird drum wear unevenly from day one. New Pontiac Sunbird drums with old shoes that have worn to match the old drum surface will contact the new bore incorrectly. Replacing both together on the Sunbird ensures proper break-in and maximum service life from both components.