Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade brake drums confirmed to fit the Plymouth Voyager, the cast-iron components that form the friction surface for the Voyager drum brake shoes. Available in standard and corrosion-coated configurations for your Voyager, every drum is manufactured to the correct inner diameter, wall thickness, and surface finish for the Plymouth Voyager
Standard/OESelect your vehicle to see compatible products and accurate pricing
The brake drum on the Plymouth Voyager is the rotating cast-iron bowl that the Voyager drum brake shoes press against to slow your vehicle. Mounted to the rear axle hub of your Plymouth Voyager, it spins with the wheel and provides the friction surface that the shoes contact under braking. Unlike brake rotors, which can be visually inspected from outside the wheel on many Voyager vehicles, Plymouth Voyager brake drums fully enclose the shoe assembly, which means wear and damage often goes unnoticed until braking performance on the Plymouth Voyager is noticeably affected.
Standard OEM-Grade Drums for the Plymouth Voyager
Standard OEM-grade cast-iron drums for the Plymouth Voyager are manufactured to the original equipment diameter, wall thickness, and surface finish specification for your Voyager. They are the direct replacement for the factory Voyager drum with no modification required.
Coated Brake Drums for the Plymouth Voyager
Coated Plymouth Voyager brake drums feature a corrosion-resistant coating applied to the external drum surfaces of your Voyager, the hat section, outer wall, and wheel mounting face. Surface rust is a common issue on Plymouth Voyager drum brake vehicles in US, particularly during periods of non-use in winter when moisture and salt collect inside the Voyager wheel well. A coated drum on your Plymouth Voyager resists surface rust that can transfer to the wheel mounting face, making future drum removal significantly easier at the next Voyager brake service.
Plymouth Voyager brake drum replacement requires matching the correct inner diameter, wall thickness, bolt circle, hub bore, and drum offset for your Voyager. Errors in any of these dimensions produce incorrect shoe-to-drum clearance, uneven wear, and braking problems on the Plymouth Voyager. Our vehicle selector eliminates those risks by confirming the correct drum for the Plymouth Voyager exact year, make, model, and axle. Coated Voyager drum options are available for vehicles with heavy salt exposure.
How long do brake drums last on a Plymouth Voyager?
Plymouth Voyager brake drums typically last 150,000 to 200,000 kilometres with periodic resurfacing, significantly longer than disc brake rotors on the Voyager. Each resurfacing removes material from the Voyager drum and reduces wall thickness. Once the Plymouth Voyager drum reaches its maximum allowable inner diameter, it must be replaced rather than turned again.
Should I replace brake drums on my Plymouth Voyager in pairs?
Yes. Replace both Plymouth Voyager drums on the same axle to maintain balanced braking. Drums of different inner diameters on the Voyager create uneven friction forces, causing the Plymouth Voyager to pull to the fresher-drum side during braking.
Should I replace drums and shoes at the same time on my Plymouth Voyager?
Yes, it is strongly recommended for the Plymouth Voyager. New shoes on a scored or out-of-round Voyager drum wear unevenly from day one. New Plymouth Voyager drums with old shoes that have worn to match the old drum surface will contact the new bore incorrectly. Replacing both together on the Voyager ensures proper break-in and maximum service life from both components.