Nissan Xterra ABS Wheel Speed Sensor in US

Your Nissan Xterra ABS wheel speed sensor is the component that makes anti-lock braking possible on your Xterra. It monitors the rotational speed of each wheel in real time and sends that data to the Nissan Xterra ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Xterra, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Nissan Xterra wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Nissan Xterra

The ABS wheel speed sensor on the Nissan Xterra is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Xterra. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Xterra ABS module interprets as wheel speed. On most modern Nissan Xterra vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Xterra systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Nissan Xterra

• ABS warning light on your Nissan Xterra dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Xterra ABS light
• ABS activating on your Nissan Xterra during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Xterra, wheels lock under hard braking on wet or icy roads
• Speedometer on your Nissan Xterra reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Nissan Xterra ABS control module

Passive vs. Active ABS Sensors for the Nissan Xterra

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Nissan Xterra. Passive sensors use an analog signal and are found on older Xterra vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Nissan Xterra vehicles manufactured after the mid-2000s and are required for full compatibility with modern Xterra traction and stability control systems.

Why GeoBrakes for the Nissan Xterra ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Nissan Xterra wheel speed sensors. A sensor that generates the correct frequency for your Xterra ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Nissan Xterra. Every sensor in the GeoBrakes catalogue is matched to the Nissan Xterra through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Xterra.

Frequently Asked Questions - Nissan Xterra ABS Wheel Speed Sensor

Can I drive my Nissan Xterra with a faulty ABS wheel speed sensor?

You can drive the Nissan Xterra with a failed ABS sensor, but the anti-lock braking system on your Xterra will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Nissan Xterra. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Nissan Xterra?

Use the GeoBrakes vehicle selector and enter the Nissan Xterra year, make, and model. The system displays only the sensors confirmed to fit the Nissan Xterra, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Xterra to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Nissan Xterra at the same time?

No. ABS wheel speed sensors on the Nissan Xterra are independent components and only the failed unit needs to be replaced. However, if your Xterra has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Nissan Xterra sensors for corrosion while the wheel is removed.