Nissan Versa Note Drum Brake and Hub Assembly in US

On many rear-wheel-drive Nissan Versa Note vehicles, pickup trucks, and older passenger cars, the brake drum and wheel hub are manufactured as a single integrated casting rather than separate serviceable components on the Versa Note. When the Versa Note drum surface wears beyond its maximum allowable diameter or develops damage requiring replacement, and the hub bearing, wheel studs, or hub flange on the Nissan Versa Note simultaneously require attention, sourcing a separate drum and hub for the Versa Note produces two separate part numbers, two separate installation operations, and two separate dimensional tolerances that must align correctly. An integrated drum and hub assembly from GeoBrakes eliminates that complexity for the Nissan Versa Note.

Signs Your Nissan Versa Note Drum and Hub Assembly Needs Replacing

• Versa Note drum inner surface scored, grooved, or worn beyond maximum inner diameter specification
• Wheel bearing noise from the Nissan Versa Note rear axle, humming or rumbling that changes pitch with speed
• Damaged, stripped, or broken wheel studs on the Versa Note requiring hub replacement
• Wheel wobble or looseness on the Nissan Versa Note detected during a push-pull hand inspection
• Cracks visible in the Versa Note drum casting near the stud circle or mounting flange
• Nissan Versa Note drum has been machined to its wear limit and cannot be resurfaced again

Benefits of a Pre-Assembled Drum and Hub Unit for the Nissan Versa Note

• Single part number covers both Versa Note drum surface and hub, no separate sourcing or compatibility matching
• Wheel studs on the Nissan Versa Note pre-installed and torqued to specification, no stud transfer from the old hub required
• Bearing race pre-pressed where applicable on the Versa Note, correct bearing preload set in the factory
• OEM-equivalent drum-to-hub dimensional relationship on the Nissan Versa Note, correct geometry for the brake shoe contact arc
• Eliminates the risk of misalignment from separately pressed bearing and drum components on the Versa Note

Why GeoBrakes for the Nissan Versa Note Drum Brake and Hub Assembly

Nissan Versa Note drum and hub assemblies are highly vehicle-specific. The drum inner diameter, hub bolt circle, hub bore, stud specification, and bearing interface on the Versa Note must all match the exact Nissan Versa Note and axle position. Our vehicle selector confirms the correct assembly for the Nissan Versa Note year, make, model, and axle before purchase. Order alongside brake shoes, a hardware kit, and wheel cylinders for a complete Versa Note rear drum brake overhaul from a single delivery.

Frequently Asked Questions - Nissan Versa Note Drum Brake and Hub Assembly

Can the drum and hub on my Nissan Versa Note be separated for individual replacement?

On Nissan Versa Note vehicles that use an integrated drum-hub casting, separating the components is not a practical service procedure without machining equipment. Complete assembly replacement is the correct approach when either the Versa Note drum surface is worn or the hub bearing or studs require service on your Nissan Versa Note.

Should drum and hub assemblies on my Nissan Versa Note be replaced in pairs?

Yes. Replacing as an axle pair on the Nissan Versa Note, both left and right rear, ensures balanced braking, even drum wear, and consistent Versa Note vehicle handling. Both assemblies on the Nissan Versa Note have operated under identical service conditions.

Does the Nissan Versa Note assembly include the wheel bearing?

This depends on the specific Versa Note design. On many Versa Note applications, the bearing is a separate pressed-in race or bolt-on cartridge not included in the Versa Note drum-hub casting. Use the GeoBrakes vehicle selector to confirm what is included for your Nissan Versa Note and axle configuration.