Nissan Titan ABS Wheel Speed Sensor in US

Your Nissan Titan ABS wheel speed sensor is the component that makes anti-lock braking possible on your Titan. It monitors the rotational speed of each wheel in real time and sends that data to the Nissan Titan ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Titan, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Nissan Titan wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Nissan Titan

The ABS wheel speed sensor on the Nissan Titan is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Titan. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Titan ABS module interprets as wheel speed. On most modern Nissan Titan vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Titan systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Nissan Titan

• ABS warning light on your Nissan Titan dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Titan ABS light
• ABS activating on your Nissan Titan during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Titan, wheels lock under hard braking on wet or icy roads
• Speedometer on your Nissan Titan reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Nissan Titan ABS control module

Passive vs. Active ABS Sensors for the Nissan Titan

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Nissan Titan. Passive sensors use an analog signal and are found on older Titan vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Nissan Titan vehicles manufactured after the mid-2000s and are required for full compatibility with modern Titan traction and stability control systems.

Why GeoBrakes for the Nissan Titan ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Nissan Titan wheel speed sensors. A sensor that generates the correct frequency for your Titan ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Nissan Titan. Every sensor in the GeoBrakes catalogue is matched to the Nissan Titan through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Titan.

Frequently Asked Questions - Nissan Titan ABS Wheel Speed Sensor

Can I drive my Nissan Titan with a faulty ABS wheel speed sensor?

You can drive the Nissan Titan with a failed ABS sensor, but the anti-lock braking system on your Titan will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Nissan Titan. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Nissan Titan?

Use the GeoBrakes vehicle selector and enter the Nissan Titan year, make, and model. The system displays only the sensors confirmed to fit the Nissan Titan, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Titan to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Nissan Titan at the same time?

No. ABS wheel speed sensors on the Nissan Titan are independent components and only the failed unit needs to be replaced. However, if your Titan has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Nissan Titan sensors for corrosion while the wheel is removed.