Nissan Tiida ABS Wheel Speed Sensor in US

Your Nissan Tiida ABS wheel speed sensor is the component that makes anti-lock braking possible on your Tiida. It monitors the rotational speed of each wheel in real time and sends that data to the Nissan Tiida ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Tiida, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Nissan Tiida wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Nissan Tiida

The ABS wheel speed sensor on the Nissan Tiida is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Tiida. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Tiida ABS module interprets as wheel speed. On most modern Nissan Tiida vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Tiida systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Nissan Tiida

• ABS warning light on your Nissan Tiida dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Tiida ABS light
• ABS activating on your Nissan Tiida during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Tiida, wheels lock under hard braking on wet or icy roads
• Speedometer on your Nissan Tiida reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Nissan Tiida ABS control module

Passive vs. Active ABS Sensors for the Nissan Tiida

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Nissan Tiida. Passive sensors use an analog signal and are found on older Tiida vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Nissan Tiida vehicles manufactured after the mid-2000s and are required for full compatibility with modern Tiida traction and stability control systems.

Why GeoBrakes for the Nissan Tiida ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Nissan Tiida wheel speed sensors. A sensor that generates the correct frequency for your Tiida ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Nissan Tiida. Every sensor in the GeoBrakes catalogue is matched to the Nissan Tiida through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Tiida.

Frequently Asked Questions - Nissan Tiida ABS Wheel Speed Sensor

Can I drive my Nissan Tiida with a faulty ABS wheel speed sensor?

You can drive the Nissan Tiida with a failed ABS sensor, but the anti-lock braking system on your Tiida will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Nissan Tiida. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Nissan Tiida?

Use the GeoBrakes vehicle selector and enter the Nissan Tiida year, make, and model. The system displays only the sensors confirmed to fit the Nissan Tiida, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Tiida to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Nissan Tiida at the same time?

No. ABS wheel speed sensors on the Nissan Tiida are independent components and only the failed unit needs to be replaced. However, if your Tiida has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Nissan Tiida sensors for corrosion while the wheel is removed.