Nissan Rogue Disc Brake Caliper Kit in US

When a caliper on the Nissan Rogue seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Rogue keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Nissan Rogue is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Nissan Rogue together.

What Is Included in the Nissan Rogue Disc Brake Caliper Kit

The kit for your Nissan Rogue includes the disc brake caliper at the correct left or right hand specification for the Rogue, either new OEM-spec or quality remanufactured to the Nissan Rogue piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Rogue caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Nissan Rogue, brake lubricant for correct pin and shim installation on your Rogue, and copper washers or banjo bolt seals for the brake hose connection where required by the Nissan Rogue application.

When a Caliper Kit Is the Correct Service Choice for the Nissan Rogue

A caliper kit is the right call for the Nissan Rogue in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Rogue are already compromised. During a high-mileage Rogue overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Nissan Rogue are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Rogue brake pad renders the friction material permanently ineffective on your Nissan Rogue.

New vs. Remanufactured Caliper for the Nissan Rogue

New OEM-specification calipers for the Nissan Rogue are manufactured from fresh materials with no prior service history, the strongest choice for Rogue vehicles in high-corrosion environments. Remanufactured calipers use original Nissan Rogue housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Rogue replacement applications.

Signs the Caliper Kit on Your Nissan Rogue Is Due

• Nissan Rogue pulling to one side during braking, one caliper applying more force than the other
• One brake pad on your Rogue worn significantly more than its pair on the same axle
• Brake drag on the Nissan Rogue with a wheel that runs hot after normal driving
• Soft or sinking Rogue brake pedal caused by a caliper piston seal leak
• Brake fluid visible around the Nissan Rogue caliper piston boot
• Persistent metallic dragging noise from one Rogue corner not explained by worn pads

Why GeoBrakes for the Nissan Rogue Caliper Kit

Calipers for the Nissan Rogue are the most position-specific brake component in the catalogue. Left and right calipers for the Rogue are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Nissan Rogue exact year, axle position, and left or right side before purchase.

Frequently Asked Questions - Nissan Rogue Disc Brake Caliper Kits

Should I replace both calipers on my Nissan Rogue at the same time?

It is strongly recommended. If one caliper on the Nissan Rogue has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Rogue. Replacing both restores balanced, even braking and eliminates the risk of the second Rogue caliper failing shortly after the first is replaced.

Do I need to bleed the brakes on my Nissan Rogue after installing a caliper kit?

Yes. Opening the hydraulic circuit on the Nissan Rogue to install the new caliper allows air to enter. After installation, the brake circuit on the Rogue must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Nissan Rogue.

What is the difference between a new and remanufactured caliper in the Nissan Rogue kit?

A new caliper for the Nissan Rogue has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Rogue housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Nissan Rogue applications.