Nissan Rogue ABS Wheel Speed Sensor in US

Your Nissan Rogue ABS wheel speed sensor is the component that makes anti-lock braking possible on your Rogue. It monitors the rotational speed of each wheel in real time and sends that data to the Nissan Rogue ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Rogue, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Nissan Rogue wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Nissan Rogue

The ABS wheel speed sensor on the Nissan Rogue is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Rogue. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Rogue ABS module interprets as wheel speed. On most modern Nissan Rogue vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Rogue systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Nissan Rogue

• ABS warning light on your Nissan Rogue dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Rogue ABS light
• ABS activating on your Nissan Rogue during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Rogue, wheels lock under hard braking on wet or icy roads
• Speedometer on your Nissan Rogue reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Nissan Rogue ABS control module

Passive vs. Active ABS Sensors for the Nissan Rogue

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Nissan Rogue. Passive sensors use an analog signal and are found on older Rogue vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Nissan Rogue vehicles manufactured after the mid-2000s and are required for full compatibility with modern Rogue traction and stability control systems.

Why GeoBrakes for the Nissan Rogue ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Nissan Rogue wheel speed sensors. A sensor that generates the correct frequency for your Rogue ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Nissan Rogue. Every sensor in the GeoBrakes catalogue is matched to the Nissan Rogue through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Rogue.

Frequently Asked Questions - Nissan Rogue ABS Wheel Speed Sensor

Can I drive my Nissan Rogue with a faulty ABS wheel speed sensor?

You can drive the Nissan Rogue with a failed ABS sensor, but the anti-lock braking system on your Rogue will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Nissan Rogue. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Nissan Rogue?

Use the GeoBrakes vehicle selector and enter the Nissan Rogue year, make, and model. The system displays only the sensors confirmed to fit the Nissan Rogue, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Rogue to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Nissan Rogue at the same time?

No. ABS wheel speed sensors on the Nissan Rogue are independent components and only the failed unit needs to be replaced. However, if your Rogue has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Nissan Rogue sensors for corrosion while the wheel is removed.