Nissan Murano Disc Brake Caliper in US

The disc brake caliper on the Nissan Murano is the hydraulic clamp at the centre of your Murano disc brake system. Every time you press the brake pedal on your Nissan Murano, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Murano interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Nissan Murano

• Nissan Murano pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Murano feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Nissan Murano axle wears significantly faster than its partner
• Brake drag on the Nissan Murano, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Murano caliper body or around the piston boot
• Grinding or scraping from one Nissan Murano wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Nissan Murano

New OEM-Specification Calipers for the Nissan Murano

New OEM-specification calipers for the Nissan Murano are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Murano factory part. They offer the longest service life on your Nissan Murano and are the strongest choice for higher-mileage Murano vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Nissan Murano

Remanufactured calipers for the Nissan Murano are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Nissan Murano replacement applications and offer excellent value.

Why GeoBrakes for the Nissan Murano Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Nissan Murano to give you the right option for your Murano and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Nissan Murano, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Nissan Murano year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Nissan Murano Disc Brake Caliper

Should I replace brake calipers on my Nissan Murano in pairs?

It is generally recommended to replace calipers as an axle pair on the Nissan Murano, both left and right on the same axle, to maintain balanced braking. If one Murano caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Nissan Murano in US?

Nissan Murano calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Murano caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Nissan Murano well before that figure.

Can a sticking caliper on my Nissan Murano damage my brake pads and rotors?

Yes. A Murano caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Nissan Murano. This rapidly wears both the pad and rotor surface on your Murano and generates enough heat buildup to damage adjacent components over time.