Nissan Maxima Disc Brake Caliper in US

The disc brake caliper on the Nissan Maxima is the hydraulic clamp at the centre of your Maxima disc brake system. Every time you press the brake pedal on your Nissan Maxima, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Maxima interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Nissan Maxima

• Nissan Maxima pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Maxima feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Nissan Maxima axle wears significantly faster than its partner
• Brake drag on the Nissan Maxima, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Maxima caliper body or around the piston boot
• Grinding or scraping from one Nissan Maxima wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Nissan Maxima

New OEM-Specification Calipers for the Nissan Maxima

New OEM-specification calipers for the Nissan Maxima are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Maxima factory part. They offer the longest service life on your Nissan Maxima and are the strongest choice for higher-mileage Maxima vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Nissan Maxima

Remanufactured calipers for the Nissan Maxima are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Nissan Maxima replacement applications and offer excellent value.

Why GeoBrakes for the Nissan Maxima Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Nissan Maxima to give you the right option for your Maxima and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Nissan Maxima, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Nissan Maxima year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Nissan Maxima Disc Brake Caliper

Should I replace brake calipers on my Nissan Maxima in pairs?

It is generally recommended to replace calipers as an axle pair on the Nissan Maxima, both left and right on the same axle, to maintain balanced braking. If one Maxima caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Nissan Maxima in US?

Nissan Maxima calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Maxima caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Nissan Maxima well before that figure.

Can a sticking caliper on my Nissan Maxima damage my brake pads and rotors?

Yes. A Maxima caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Nissan Maxima. This rapidly wears both the pad and rotor surface on your Maxima and generates enough heat buildup to damage adjacent components over time.