Nissan Juke Disc Brake Caliper in US

The disc brake caliper on the Nissan Juke is the hydraulic clamp at the centre of your Juke disc brake system. Every time you press the brake pedal on your Nissan Juke, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Juke interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Nissan Juke

• Nissan Juke pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Juke feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Nissan Juke axle wears significantly faster than its partner
• Brake drag on the Nissan Juke, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Juke caliper body or around the piston boot
• Grinding or scraping from one Nissan Juke wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Nissan Juke

New OEM-Specification Calipers for the Nissan Juke

New OEM-specification calipers for the Nissan Juke are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Juke factory part. They offer the longest service life on your Nissan Juke and are the strongest choice for higher-mileage Juke vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Nissan Juke

Remanufactured calipers for the Nissan Juke are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Nissan Juke replacement applications and offer excellent value.

Why GeoBrakes for the Nissan Juke Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Nissan Juke to give you the right option for your Juke and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Nissan Juke, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Nissan Juke year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Nissan Juke Disc Brake Caliper

Should I replace brake calipers on my Nissan Juke in pairs?

It is generally recommended to replace calipers as an axle pair on the Nissan Juke, both left and right on the same axle, to maintain balanced braking. If one Juke caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Nissan Juke in US?

Nissan Juke calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Juke caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Nissan Juke well before that figure.

Can a sticking caliper on my Nissan Juke damage my brake pads and rotors?

Yes. A Juke caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Nissan Juke. This rapidly wears both the pad and rotor surface on your Juke and generates enough heat buildup to damage adjacent components over time.