Standard/OEIn stock
$18.64
3 items in stock
Quality For FREE Shipping
12-H621116• Front Right• Brake Hydraulic Hose
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes carries OEM-grade brake hydraulic hoses confirmed to fit the Nissan Cube, the critical flexible lines that carry brake fluid from the Cube rigid steel brake lines to the calipers and wheel cylinders at each corner. Every Nissan Cube hose is direct-fit, pressure-rated to OEM specification.
Standard/OE$18.64
3 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$18.64
9 items in stock
Select your vehicle to see compatible products and accurate pricing
Standard/OE$11.75
10 items in stock
Select your vehicle to see compatible products and accurate pricing
Brake hydraulic hoses on the Nissan Cube are the flexible bridge between your Cube rigid steel brake lines and the moving brake assemblies at each wheel. They flex with every suspension stroke and steering input on your Nissan Cube, delivering the hydraulic pressure that actuates your brakes on every stop. Because they are exposed to road salt, heat cycles, and the physical stresses of Cube suspension movement, brake hoses deteriorate from the inside out on the Nissan Cube, and a failed hose can cause partial or complete loss of braking at that wheel.
American roads subject Nissan Cube brake hoses to a combination of stresses that accelerate deterioration beyond what most service intervals account for. Road salt splashes directly onto Cube hose end fittings and corrodes the metal crimps that seal the hose to the brake line. Repeated freeze-thaw cycles stress the Cube hose rubber compound from the outside, while brake fluid moisture absorption attacks the inner reinforcement layer from within.
Brake hoses for the Nissan Cube are among the most vehicle-specific brake parts. Length, end fitting type, mounting bracket position, and inner diameter are all determined by the Cube brake system design. Our vehicle selector ensures you receive a hose with the correct dimensions and fitting geometry for the Nissan Cube, not a universal-fit compromise. Every Cube hose meets OEM hydraulic pressure rating and flexibility specifications, with corrosion-resistant end fittings suited to American road salt exposure.
How often should brake hoses be replaced on a Nissan Cube?
In US, where road salt exposure on the Nissan Cube is heavy, inspect Cube hoses annually and replace at the first sign of surface cracking, bulging, or corrosion at the end fittings, or every 100,000 kilometres.
Can a damaged brake hose on my Nissan Cube cause brake drag?
Yes. A Cube hose that has deteriorated internally can collapse under pressure, allowing fluid to flow to the caliper when you brake but restricting the return flow when you release the pedal. This keeps the Nissan Cube caliper partially engaged, causing brake drag, rapid pad and rotor wear, and heat buildup.
Should I replace brake hoses on my Nissan Cube in pairs?
It is recommended to replace Nissan Cube brake hoses as an axle pair. If one hose has reached the point of replacement, the hose on the opposite side of your Cube has been exposed to the same conditions for the same period and is at a similar stage of deterioration.