Nissan Cube ABS Wheel Speed Sensor in US

Your Nissan Cube ABS wheel speed sensor is the component that makes anti-lock braking possible on your Cube. It monitors the rotational speed of each wheel in real time and sends that data to the Nissan Cube ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Cube, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Nissan Cube wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Nissan Cube

The ABS wheel speed sensor on the Nissan Cube is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Cube. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Cube ABS module interprets as wheel speed. On most modern Nissan Cube vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Cube systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Nissan Cube

• ABS warning light on your Nissan Cube dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Cube ABS light
• ABS activating on your Nissan Cube during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Cube, wheels lock under hard braking on wet or icy roads
• Speedometer on your Nissan Cube reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Nissan Cube ABS control module

Passive vs. Active ABS Sensors for the Nissan Cube

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Nissan Cube. Passive sensors use an analog signal and are found on older Cube vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Nissan Cube vehicles manufactured after the mid-2000s and are required for full compatibility with modern Cube traction and stability control systems.

Why GeoBrakes for the Nissan Cube ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Nissan Cube wheel speed sensors. A sensor that generates the correct frequency for your Cube ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Nissan Cube. Every sensor in the GeoBrakes catalogue is matched to the Nissan Cube through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Cube.

Frequently Asked Questions - Nissan Cube ABS Wheel Speed Sensor

Can I drive my Nissan Cube with a faulty ABS wheel speed sensor?

You can drive the Nissan Cube with a failed ABS sensor, but the anti-lock braking system on your Cube will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Nissan Cube. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Nissan Cube?

Use the GeoBrakes vehicle selector and enter the Nissan Cube year, make, and model. The system displays only the sensors confirmed to fit the Nissan Cube, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Cube to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Nissan Cube at the same time?

No. ABS wheel speed sensors on the Nissan Cube are independent components and only the failed unit needs to be replaced. However, if your Cube has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Nissan Cube sensors for corrosion while the wheel is removed.