Nissan Altima Disc Brake Caliper Kit in US

When a caliper on the Nissan Altima seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Altima keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Nissan Altima is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Nissan Altima together.

What Is Included in the Nissan Altima Disc Brake Caliper Kit

The kit for your Nissan Altima includes the disc brake caliper at the correct left or right hand specification for the Altima, either new OEM-spec or quality remanufactured to the Nissan Altima piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Altima caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Nissan Altima, brake lubricant for correct pin and shim installation on your Altima, and copper washers or banjo bolt seals for the brake hose connection where required by the Nissan Altima application.

When a Caliper Kit Is the Correct Service Choice for the Nissan Altima

A caliper kit is the right call for the Nissan Altima in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Altima are already compromised. During a high-mileage Altima overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Nissan Altima are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Altima brake pad renders the friction material permanently ineffective on your Nissan Altima.

New vs. Remanufactured Caliper for the Nissan Altima

New OEM-specification calipers for the Nissan Altima are manufactured from fresh materials with no prior service history, the strongest choice for Altima vehicles in high-corrosion environments. Remanufactured calipers use original Nissan Altima housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Altima replacement applications.

Signs the Caliper Kit on Your Nissan Altima Is Due

• Nissan Altima pulling to one side during braking, one caliper applying more force than the other
• One brake pad on your Altima worn significantly more than its pair on the same axle
• Brake drag on the Nissan Altima with a wheel that runs hot after normal driving
• Soft or sinking Altima brake pedal caused by a caliper piston seal leak
• Brake fluid visible around the Nissan Altima caliper piston boot
• Persistent metallic dragging noise from one Altima corner not explained by worn pads

Why GeoBrakes for the Nissan Altima Caliper Kit

Calipers for the Nissan Altima are the most position-specific brake component in the catalogue. Left and right calipers for the Altima are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Nissan Altima exact year, axle position, and left or right side before purchase.

Frequently Asked Questions - Nissan Altima Disc Brake Caliper Kits

Should I replace both calipers on my Nissan Altima at the same time?

It is strongly recommended. If one caliper on the Nissan Altima has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Altima. Replacing both restores balanced, even braking and eliminates the risk of the second Altima caliper failing shortly after the first is replaced.

Do I need to bleed the brakes on my Nissan Altima after installing a caliper kit?

Yes. Opening the hydraulic circuit on the Nissan Altima to install the new caliper allows air to enter. After installation, the brake circuit on the Altima must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Nissan Altima.

What is the difference between a new and remanufactured caliper in the Nissan Altima kit?

A new caliper for the Nissan Altima has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Altima housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Nissan Altima applications.