Nissan Altima Disc Brake Caliper in US

The disc brake caliper on the Nissan Altima is the hydraulic clamp at the centre of your Altima disc brake system. Every time you press the brake pedal on your Nissan Altima, brake fluid pressure forces the caliper pistons outward, squeezing the brake pads against the rotor and generating the friction that stops your vehicle. A seized, leaking, or sticking caliper on the Altima interferes with that process at the source, causing uneven braking, accelerated pad and rotor wear, and pulling to one side that worsens over time.

Signs of a Failing Disc Brake Caliper on the Nissan Altima

• Nissan Altima pulls strongly to one side during braking, a seized caliper on one side applies more force
• Brake pedal on your Altima feels soft or spongy and improves after pumping, caliper piston seal leaking
• One brake pad on your Nissan Altima axle wears significantly faster than its partner
• Brake drag on the Nissan Altima, vehicle feels like it is fighting resistance at normal road speed
• Visible brake fluid leaking from the Altima caliper body or around the piston boot
• Grinding or scraping from one Nissan Altima wheel that persists after confirming pads are not worn

New OEM-Spec vs. Remanufactured Calipers for the Nissan Altima

New OEM-Specification Calipers for the Nissan Altima

New OEM-specification calipers for the Nissan Altima are brand-new units manufactured to the exact piston dimensions, seal specifications, and material tolerances of the original Altima factory part. They offer the longest service life on your Nissan Altima and are the strongest choice for higher-mileage Altima vehicles or those operated in high-corrosion environments.

Remanufactured Calipers for the Nissan Altima

Remanufactured calipers for the Nissan Altima are original caliper housings completely disassembled, cleaned, inspected, and rebuilt with new pistons, seals, boots, and hardware. Quality remanufactured units perform identically to new calipers for most Nissan Altima replacement applications and offer excellent value.

Why GeoBrakes for the Nissan Altima Disc Brake Caliper

GeoBrakes stocks both new and remanufactured calipers for the Nissan Altima to give you the right option for your Altima and budget. As an authorized retailer of Cardone, EBC, Raybestos, and other trusted brands for the Nissan Altima, every caliper purchase carries the full manufacturer warranty. Our vehicle selector confirms the correct caliper for the Nissan Altima year, axle position, and correct left or right hand fitment before you place your order.

Frequently Asked Questions - Nissan Altima Disc Brake Caliper

Should I replace brake calipers on my Nissan Altima in pairs?

It is generally recommended to replace calipers as an axle pair on the Nissan Altima, both left and right on the same axle, to maintain balanced braking. If one Altima caliper has failed, the caliper on the opposite side has experienced the same service conditions and is likely at a similar stage of wear.

How long do disc brake calipers last on a Nissan Altima in US?

Nissan Altima calipers typically last 100,000 to 150,000 kilometres, but American road salt and moisture accelerate corrosion of Altima caliper guide pins, slide pins, and piston seal boots, often causing premature failure on the Nissan Altima well before that figure.

Can a sticking caliper on my Nissan Altima damage my brake pads and rotors?

Yes. A Altima caliper that does not fully retract keeps the brake pad in partial contact with the rotor between stops, generating constant friction and heat on your Nissan Altima. This rapidly wears both the pad and rotor surface on your Altima and generates enough heat buildup to damage adjacent components over time.