Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks complete brake drum kits confirmed to fit the Nissan 810, pairing OEM-grade brake drums at the correct inner diameter for the 810 with matched drum brake shoes and hardware for a full rear drum brake overhaul on your Nissan 810 in a single package. Every kit ensures drums and shoes are replaced together on the 810, the only way to achieve correct contact geometry and maximum service life from both components. Each kit ships with a 100% fitment guarantee and free delivery across US on orders over $99.
Standard/OESelect your vehicle to see compatible products and accurate pricing
A brake drum kit for the Nissan 810 addresses the most common brake service shortcut: replacing shoes on a worn 810 drum, or fitting new drums with glazed, worn shoes. Either combination prevents correct break-in on the Nissan 810. New shoes have a specific arc radius that must contact a fresh drum surface across the full lining width on your 810. A GeoBrakes drum kit eliminates that incompatibility by delivering matched drums and shoes confirmed for your Nissan 810 in a single order.
The kit for your Nissan 810 includes OEM-spec cast-iron brake drums at the correct inner diameter for the 810 for both left and right rear wheels, drum brake shoes with OEM-grade friction lining matched to the Nissan 810 drum bore and wheel cylinder specification, a brake hardware kit with return springs, hold-down hardware, and self-adjusters specific to the 810, and drum retaining hardware where required by the Nissan 810 application.
Road salt and freeze-thaw cycles deteriorate every component in the Nissan 810 drum brake system over the same service interval. By the time a 810 drum is worn, the shoes are typically at or near minimum thickness, the hardware is corroded, and the wheel cylinder boots are deteriorating on your Nissan 810. Replacing drums and shoes alone while leaving worn springs and seized adjusters on the 810 produces a service that underperforms within months.
Drum and shoe arc radius must match exactly for correct contact geometry on the Nissan 810. An incorrect drum diameter or wrong-spec shoe lining for the 810 produces immediate uneven wear and noise. Every kit in the GeoBrakes catalogue is assembled for the Nissan 810, drum diameter, shoe arc, and hardware spring rates all confirmed as a matched set specific to the 810.
How do I know if I need a basic or full-service kit for my Nissan 810?
A basic kit for the Nissan 810 is appropriate when the wheel cylinders have been recently replaced and show no signs of leaking. A full-service kit is the stronger choice during a high-mileage 810 overhaul, particularly on American Nissan 810 vehicles with significant winter salt exposure.
Should I replace drum kits on both rear wheels of my Nissan 810 at the same time?
Yes. Always replace drum brake components on the Nissan 810 as an axle set, both left and right rear, to maintain balanced braking force. Drums and shoes at different wear stages on the 810 create uneven rear braking that pulls the vehicle to one side.
Can I install a brake drum kit on my Nissan 810 myself?
Rear drum brake service on the Nissan 810 is a moderately advanced DIY task. It requires removing the drum, dismantling the shoe assembly on the 810, correctly routing return springs, and adjusting shoes to the correct drum clearance. A service manual specific to the Nissan 810 is essential.