Standard/OEAdd Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks OEM-grade brake drums confirmed to fit the Nissan 810, the cast-iron components that form the friction surface for the 810 drum brake shoes. Available in standard and corrosion-coated configurations for your 810, every drum is manufactured to the correct inner diameter, wall thickness, and surface finish for the Nissan 810
Standard/OESelect your vehicle to see compatible products and accurate pricing
The brake drum on the Nissan 810 is the rotating cast-iron bowl that the 810 drum brake shoes press against to slow your vehicle. Mounted to the rear axle hub of your Nissan 810, it spins with the wheel and provides the friction surface that the shoes contact under braking. Unlike brake rotors, which can be visually inspected from outside the wheel on many 810 vehicles, Nissan 810 brake drums fully enclose the shoe assembly, which means wear and damage often goes unnoticed until braking performance on the Nissan 810 is noticeably affected.
Standard OEM-Grade Drums for the Nissan 810
Standard OEM-grade cast-iron drums for the Nissan 810 are manufactured to the original equipment diameter, wall thickness, and surface finish specification for your 810. They are the direct replacement for the factory 810 drum with no modification required.
Coated Brake Drums for the Nissan 810
Coated Nissan 810 brake drums feature a corrosion-resistant coating applied to the external drum surfaces of your 810, the hat section, outer wall, and wheel mounting face. Surface rust is a common issue on Nissan 810 drum brake vehicles in US, particularly during periods of non-use in winter when moisture and salt collect inside the 810 wheel well. A coated drum on your Nissan 810 resists surface rust that can transfer to the wheel mounting face, making future drum removal significantly easier at the next 810 brake service.
Nissan 810 brake drum replacement requires matching the correct inner diameter, wall thickness, bolt circle, hub bore, and drum offset for your 810. Errors in any of these dimensions produce incorrect shoe-to-drum clearance, uneven wear, and braking problems on the Nissan 810. Our vehicle selector eliminates those risks by confirming the correct drum for the Nissan 810 exact year, make, model, and axle. Coated 810 drum options are available for vehicles with heavy salt exposure.
How long do brake drums last on a Nissan 810?
Nissan 810 brake drums typically last 150,000 to 200,000 kilometres with periodic resurfacing, significantly longer than disc brake rotors on the 810. Each resurfacing removes material from the 810 drum and reduces wall thickness. Once the Nissan 810 drum reaches its maximum allowable inner diameter, it must be replaced rather than turned again.
Should I replace brake drums on my Nissan 810 in pairs?
Yes. Replace both Nissan 810 drums on the same axle to maintain balanced braking. Drums of different inner diameters on the 810 create uneven friction forces, causing the Nissan 810 to pull to the fresher-drum side during braking.
Should I replace drums and shoes at the same time on my Nissan 810?
Yes, it is strongly recommended for the Nissan 810. New shoes on a scored or out-of-round 810 drum wear unevenly from day one. New Nissan 810 drums with old shoes that have worn to match the old drum surface will contact the new bore incorrectly. Replacing both together on the 810 ensures proper break-in and maximum service life from both components.