Standard/OE$143.35
9 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes stocks disc brake caliper kits confirmed to fit the Nissan 350z, pairing a replacement caliper at the correct left or right hand specification for the 350z with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Nissan 350z is restored in a single service. Every kit is confirmed for the Nissan 350z exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OE$143.35
9 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Nissan 350z seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your 350z keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Nissan 350z is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Nissan 350z together.
The kit for your Nissan 350z includes the disc brake caliper at the correct left or right hand specification for the 350z, either new OEM-spec or quality remanufactured to the Nissan 350z piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the 350z caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Nissan 350z, brake lubricant for correct pin and shim installation on your 350z, and copper washers or banjo bolt seals for the brake hose connection where required by the Nissan 350z application.
A caliper kit is the right call for the Nissan 350z in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your 350z are already compromised. During a high-mileage 350z overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Nissan 350z are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the 350z brake pad renders the friction material permanently ineffective on your Nissan 350z.
New OEM-specification calipers for the Nissan 350z are manufactured from fresh materials with no prior service history, the strongest choice for 350z vehicles in high-corrosion environments. Remanufactured calipers use original Nissan 350z housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most 350z replacement applications.
Calipers for the Nissan 350z are the most position-specific brake component in the catalogue. Left and right calipers for the 350z are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Nissan 350z exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Nissan 350z at the same time?
It is strongly recommended. If one caliper on the Nissan 350z has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your 350z. Replacing both restores balanced, even braking and eliminates the risk of the second 350z caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Nissan 350z after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Nissan 350z to install the new caliper allows air to enter. After installation, the brake circuit on the 350z must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Nissan 350z.
What is the difference between a new and remanufactured caliper in the Nissan 350z kit?
A new caliper for the Nissan 350z has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original 350z housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Nissan 350z applications.