GeoBrakes stocks a complete range of passive and active ABS wheel speed sensors confirmed to fit the Nissan 200sx, each sourced to OEM specifications for direct-fit installation and reliable ABS performance on your 200sx. Every Nissan 200sx sensor is compatible with traction control and stability control systems.
Your Nissan 200sx ABS wheel speed sensor is the component that makes anti-lock braking possible on your 200sx. It monitors the rotational speed of each wheel in real time and sends that data to the Nissan 200sx ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your 200sx, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Nissan 200sx wheel speed data is reaching the module.
The ABS wheel speed sensor on the Nissan 200sx is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your 200sx. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the 200sx ABS module interprets as wheel speed. On most modern Nissan 200sx vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple 200sx systems simultaneously.
GeoBrakes stocks both passive and active ABS wheel speed sensors for the Nissan 200sx. Passive sensors use an analog signal and are found on older 200sx vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Nissan 200sx vehicles manufactured after the mid-2000s and are required for full compatibility with modern 200sx traction and stability control systems.
Signal accuracy matters as much as fitment with Nissan 200sx wheel speed sensors. A sensor that generates the correct frequency for your 200sx ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Nissan 200sx. Every sensor in the GeoBrakes catalogue is matched to the Nissan 200sx through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your 200sx.
Can I drive my Nissan 200sx with a faulty ABS wheel speed sensor?
You can drive the Nissan 200sx with a failed ABS sensor, but the anti-lock braking system on your 200sx will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Nissan 200sx. Replacing a failed sensor promptly is strongly recommended, particularly before winter.
How do I find the right ABS sensor for my Nissan 200sx?
Use the GeoBrakes vehicle selector and enter the Nissan 200sx year, make, and model. The system displays only the sensors confirmed to fit the Nissan 200sx, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your 200sx to avoid receiving the wrong unit.
Do I need to replace all four ABS sensors on my Nissan 200sx at the same time?
No. ABS wheel speed sensors on the Nissan 200sx are independent components and only the failed unit needs to be replaced. However, if your 200sx has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Nissan 200sx sensors for corrosion while the wheel is removed.