Mitsubishi Rvr ABS Wheel Speed Sensor in US

Your Mitsubishi Rvr ABS wheel speed sensor is the component that makes anti-lock braking possible on your Rvr. It monitors the rotational speed of each wheel in real time and sends that data to the Mitsubishi Rvr ABS control module, which uses it to prevent wheel lockup during emergency stops. When a sensor fails on your Rvr, your ABS loses the input it needs. On wet, icy, or gravel road surfaces, the difference between a controlled stop and a skid can come down to whether your Mitsubishi Rvr wheel speed data is reaching the module.

What Is the ABS Wheel Speed Sensor on Your Mitsubishi Rvr

The ABS wheel speed sensor on the Mitsubishi Rvr is an electromagnetic or Hall-effect sensor mounted near each wheel hub or bearing assembly of your Rvr. It generates an electronic signal as a toothed reluctor ring rotates past it, producing a frequency the Rvr ABS module interprets as wheel speed. On most modern Mitsubishi Rvr vehicles, this same data feeds the traction control system, electronic stability control, and electronic brake force distribution, making a functioning wheel speed sensor critical to the safe operation of multiple Rvr systems simultaneously.

Signs of a Failing ABS Wheel Speed Sensor on the Mitsubishi Rvr

• ABS warning light on your Mitsubishi Rvr dashboard, the most common first indicator of a failing sensor
• Traction control or stability control warning light illuminated alongside the Rvr ABS light
• ABS activating on your Mitsubishi Rvr during normal stops at low speed where it should not engage
• Complete ABS deactivation on the Rvr, wheels lock under hard braking on wet or icy roads
• Speedometer on your Mitsubishi Rvr reading erratically or dropping to zero at speed
• Fault codes in the C0035 to C0050 range stored in the Mitsubishi Rvr ABS control module

Passive vs. Active ABS Sensors for the Mitsubishi Rvr

GeoBrakes stocks both passive and active ABS wheel speed sensors for the Mitsubishi Rvr. Passive sensors use an analog signal and are found on older Rvr vehicles and many trucks still in service. Active Hall-effect sensors require a small power supply and output a clean digital signal, offering greater accuracy at very low speeds. Active sensors are standard on most Mitsubishi Rvr vehicles manufactured after the mid-2000s and are required for full compatibility with modern Rvr traction and stability control systems.

Why GeoBrakes for the Mitsubishi Rvr ABS Wheel Speed Sensor

Signal accuracy matters as much as fitment with Mitsubishi Rvr wheel speed sensors. A sensor that generates the correct frequency for your Rvr ABS module ensures consistent ABS calibration, proper traction control thresholds, and accurate stability control response on your Mitsubishi Rvr. Every sensor in the GeoBrakes catalogue is matched to the Mitsubishi Rvr through our vehicle selector, with front and rear positions listed separately to eliminate position errors on your Rvr.

Frequently Asked Questions - Mitsubishi Rvr ABS Wheel Speed Sensor

Can I drive my Mitsubishi Rvr with a faulty ABS wheel speed sensor?

You can drive the Mitsubishi Rvr with a failed ABS sensor, but the anti-lock braking system on your Rvr will be completely disabled. On icy or wet American roads, this significantly increases stopping distances and the risk of losing steering control during hard braking on your Mitsubishi Rvr. Replacing a failed sensor promptly is strongly recommended, particularly before winter.

How do I find the right ABS sensor for my Mitsubishi Rvr?

Use the GeoBrakes vehicle selector and enter the Mitsubishi Rvr year, make, and model. The system displays only the sensors confirmed to fit the Mitsubishi Rvr, with front and rear positions listed separately. Select the position matching the sensor you are replacing on your Rvr to avoid receiving the wrong unit.

Do I need to replace all four ABS sensors on my Mitsubishi Rvr at the same time?

No. ABS wheel speed sensors on the Mitsubishi Rvr are independent components and only the failed unit needs to be replaced. However, if your Rvr has high mileage and one sensor has failed, it is worth visually inspecting the connectors on the other Mitsubishi Rvr sensors for corrosion while the wheel is removed.