Mitsubishi Raider Disc Brake Kit in US

A complete disc brake kit for the Mitsubishi Raider is the most efficient way to perform a full axle disc brake service on your Raider. The friction components, rotor surface finish, pad compound, and caliper hardware on the Mitsubishi Raider all function as an integrated system. Sourcing each element separately for the Raider introduces compatibility variables that manifest as brake noise, vibration, or inconsistent pedal feel in the first months of service on your Mitsubishi Raider.

What Is Included in the Mitsubishi Raider Disc Brake Kit

The kit for your Mitsubishi Raider includes front or rear disc brake rotors at OEM or performance specification for the Raider, brake pads in ceramic or semi-metallic formulation compound-matched to the Mitsubishi Raider rotor specification, a caliper hardware kit with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Raider, brake lubricant for correct caliper pin and shim installation on your Mitsubishi Raider, and rotor mounting hardware where required by the Mitsubishi Raider application.

Three Kit Levels for the Mitsubishi Raider

OEM Replacement Disc Brake Kit for the Mitsubishi Raider

Restores factory braking performance exactly on your Mitsubishi Raider, the correct specification for everyday commuting and family use of the Raider in American conditions.

Antirust Coated Disc Brake Kit for the Mitsubishi Raider

The most practical choice for American Mitsubishi Raider drivers. Zinc-coated or e-coated rotor surfaces on the Raider resist the rust that plain rotors develop within days of road salt exposure on your Mitsubishi Raider, maintaining consistent friction performance through multiple winter seasons.

Performance Disc Brake Kit for the Mitsubishi Raider

Uses cross-drilled and slotted rotors with high-performance pads for Mitsubishi Raider drivers who tow, drive mountain roads, or generate sustained braking temperatures beyond what factory-spec rotors manage effectively on the Raider.

Why Correct Hardware Is as Important as the Friction Components on the Mitsubishi Raider

Caliper slide pins, pin boots, and anti-rattle clips on the Mitsubishi Raider are the most commonly overlooked components in a brake service and the most common cause of brake noise complaints after a pad change on the Raider. Sticking slide pins on your Mitsubishi Raider prevent the caliper from floating freely, causing the outer pad to wear faster than the inner. Every GeoBrakes disc brake kit for the Raider includes fresh hardware as a standard component.

Signs the Disc Brake Kit on Your Mitsubishi Raider Is Due

• Vibration or pulsation through the Raider brake pedal during stops
• Squealing or grinding from the Mitsubishi Raider brake corners indicating worn pads and damaged rotors
• Raider rotor surfaces scored, grooved, or below minimum thickness specification
• Mitsubishi Raider pulling to one side under braking
• Brake warning light illuminated on your Raider dashboard

Why GeoBrakes for the Mitsubishi Raider Disc Brake Kit

Our disc brake kit range for the Mitsubishi Raider is built with coated rotor options at every kit level to address road salt corrosion that shortens rotor life on most American Raider applications. As an authorized retailer of Cardone, EBC, Brembo, Raybestos, and Akebono, every kit for the Mitsubishi Raider ships with full manufacturer warranty coverage.

Frequently Asked Questions - Mitsubishi Raider Disc Brake Kits

Should I buy a front kit, rear kit, or both for my Mitsubishi Raider?

Front brakes on the Mitsubishi Raider handle 60 to 70 percent of braking force and wear faster than the rear. If only one axle on your Raider is due for service, buy that kit. If both axles on the Mitsubishi Raider need service simultaneously, combining them in one order above $99 qualifies for free US-wide delivery.

What rotor type should I choose for my Mitsubishi Raider in American conditions?

For everyday commuting on your Mitsubishi Raider, an antirust coated OEM kit is the most practical choice, delivering factory-level performance while resisting the corrosion plain rotors develop rapidly on the Raider in road salt conditions. For towing or performance driving with your Mitsubishi Raider, a drilled-and-slotted performance kit provides improved heat management.

How long do disc brake kits last on a Mitsubishi Raider?

Under normal American driving, a quality disc brake kit on the Mitsubishi Raider typically lasts 50,000 to 70,000 kilometres. Antirust coated kits tend to last longer on the Raider because corrosion is a major cause of early rotor replacement on American Mitsubishi Raider vehicles.