Standard/OE$17.08
10 items in stock
Add Vehicle to Confirm Fitment
Select your vehicle to see compatible products and accurate pricing
GeoBrakes carries OEM-grade drum brake wheel cylinders confirmed to fit the Mitsubishi I Miev, the hydraulic actuators at the top of each drum brake assembly that convert brake fluid pressure into the mechanical force that pushes the I Miev shoes against the drum. Available in new and remanufactured options for your I Miev, every cylinder is bored to OEM specifications
Standard/OE$17.08
10 items in stock
Select your vehicle to see compatible products and accurate pricing
The drum brake wheel cylinder on the Mitsubishi I Miev is the hydraulic component that actuates your I Miev drum brake shoes every time you press the brake pedal. Brake fluid pressure from the master cylinder enters the I Miev wheel cylinder and acts equally on two opposed pistons, pushing them outward simultaneously toward each shoe on the Mitsubishi I Miev. A leaking I Miev wheel cylinder actively bleeds hydraulic pressure from the brake circuit and contaminates the brake shoes with fluid, both of which directly compromise your ability to stop the Mitsubishi I Miev.
Mitsubishi I Miev drum brake wheel cylinders are particularly vulnerable to corrosion in American road salt conditions. Salt water penetrates the dust boots over time on the I Miev, attacking the cylinder bore surface. Once the Mitsubishi I Miev bore is pitted, new piston cup seals cannot maintain a leak-free seal. Internally corroded I Miev cylinders must be replaced, not rebuilt. Vehicles in high-salt urban environments often require I Miev wheel cylinder replacement on the same service interval as brake shoes.
GeoBrakes stocks both new OEM-specification wheel cylinders and quality remanufactured units for the Mitsubishi I Miev. New cylinders are the stronger choice for I Miev vehicles in high-corrosion environments. Remanufactured units offer excellent value for Mitsubishi I Miev vehicles in moderate conditions where the original bore was sound. Our vehicle selector confirms the correct I Miev cylinder, right bore diameter, port location, and mounting configuration, for your I Miev drum brake assembly before purchase.
Can I drive my Mitsubishi I Miev with a leaking wheel cylinder?
No. A leaking I Miev cylinder actively loses hydraulic pressure from the brake circuit, reducing stopping force on your Mitsubishi I Miev over time. Brake fluid that reaches the I Miev shoes renders the friction material ineffective. A leaking Mitsubishi I Miev wheel cylinder is an immediate safety concern that requires urgent attention.
Should I replace both wheel cylinders on my Mitsubishi I Miev at the same time?
Yes. If one I Miev cylinder has leaked or seized due to age and corrosion, the cylinder on the opposite side of the Mitsubishi I Miev has experienced identical conditions and is at a similar stage of deterioration. Replacing both ensures balanced hydraulic pressure on your I Miev and avoids a second service call within months.
Do I need to bleed the brakes on my Mitsubishi I Miev after replacing a wheel cylinder?
Yes. Replacing a I Miev wheel cylinder opens the hydraulic circuit, allowing air to enter. After installation on the Mitsubishi I Miev, the entire rear brake circuit must be bled to remove all air and restore a firm, consistent brake pedal on your I Miev.